VIP Manufacturers

  • Bridge-type Milling Machine

    Vertical Milling Machines image Vision Wide Tech Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1.MS series portal mill machines, with typical VW products features of rigid structure and high precision, are designed with direct-driven X-Y transmission device and torque enlarger unit on X-axis, increase the X-Y moving accuracy and offer the combination control of speed and precision.
    2.Twin Hydraulic cylinders pl....

    View all products from Vision Wide Tech Co., Ltd.

  • Vertical Milling Machines

    Vertical Milling Machines image Top-One Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. Product name: vertical milling machine.
    2. Product type: TOM-3VK.
    3. Spindle:
    (1) Spindle taper: R8(NST30).
    (2) Spindle speeds: 60-4200 RPM (Varialbe).
    (3) Quill diameter 85.725mm(3.37").
    (4) Quill travel 127mm(5").
    (5) Spindle motor 3HP.

    View all products from Top-One Machinery Co., Ltd.

  • Vertical & Horizontal Milling Machines

    Vertical Milling Machines image Jiuh Yeh Precision Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. The machine column is manufactured from high quality cast iron
    FC-30, tempered for long term accuracy. FC-30 cast iron table is tempered, hardened and precision ground.
    2. The spindle is precision machined from SCM-21 alloy steel. tempered and carbon treated, ensuring maximum stability for heavy duty cutting.
    3. ....

    View all products from Jiuh Yeh Precision Machinery Co., Ltd.

  • Hight Efficiency Vertical Turret Milling Machine

    Vertical Milling Machines image FALCON MACHINE TOOLS CO., LTD.

    The Spec Of Vertical Milling Machines :
    Features:
    * Dynamically Balanced Motor and Ground Pulleys.
    * Chrome-Plated and Bearing Supported Motor Shaft Provides An Extremely Smooth, Low Vibration Quiet Drive.
    * High Precision Spindles Use Class 7 Angular Contact Bearings.
    * Spindle Runout Guar Anteed to be Within 0.00015".
    * The Dovetail and Square S....

    View all products from FALCON MACHINE TOOLS CO., LTD.

Golden Suppliers

  • Bridge-type Milling Machine

    Vertical Milling Machines image Vision Wide Tech Co., Ltd.

    The Spec Of Vertical Milling Machines :
    MSE series is particularly designed for machining delicate mold and aluminum alloy. With the ultra-wide column structure providing best rigid support, SE is able to meet requirements at high speed, high accuracy, high efficiency, and mass aluminum chip removal.

    1.X, Y and Z axis equipped with Direct-Driven transmiss....

    View all products from Vision Wide Tech Co., Ltd.

  • Bed Type Turret Vertical Milling Machines

    Vertical Milling Machines image Jiuh Yeh Precision Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. Integrated automatic lubricating system.
    2. Cooling system.
    3. Each travel axis is equipped with limit switches to ensure safety.
    4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
    5. The x, y axis slideways coated with low-friction property materia....

    View all products from Jiuh Yeh Precision Machinery Co., Ltd.

  • FLOOR TYPE MILLING DRILLING MACHINE

    Vertical Milling Machines image Taiwan Rong Fu Industrial Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1.Floor type milling/drilling machine.
    2.Can also select swivel vise table for more performance.
    3.C model for cross table, S model for square table.

    View all products from Taiwan Rong Fu Industrial Co., Ltd.

  • Step Speed Head Vertical Milling Machine

    Vertical Milling Machines image Top-One Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    HEAVY DUTY MODEL.
    HIGH COLUMN.
    50"X10" TABLE
    5HP MOTOR.
    Powered table elevation.
    Electric control box with saftey switch.
    Halogen work lamp.
    Auto-lubrication.
    Meehanite castings.
    Hardened & ground cross slide way and table.
    Chrome hardened, ground quill.
    ....

    View all products from Top-One Machinery Co., Ltd.

  • CNC Vertical Milling Machine

    Vertical Milling Machines image TRUPRO-TEC Industrial Co., Ltd.

    The Spec Of Vertical Milling Machines :
    ‧10”×54” table
    ‧5HP spindle motor (5HP inverter motor by optional).
    ‧NST#40 spindle
    ‧Turcite-B coated on XY slide-way & gibs.
    ‧Hardened and ground on XY
    ‧Slide-ways & table
    ‧Square way on Y axis & column.
    ‧Grinding on table T-slot
    ‧Dia. 1-1/2”(38mm) lifting screw.
    ‧Ball-s....

    View all products from TRUPRO-TEC Industrial Co., Ltd.

  • Bed Type Vertical Boring & Milling Machine

    Vertical Milling Machines image Chung Sing Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    Features :
    *The column is made out of box shape high tensile strength casting reinforced with honeycombed ribbings. It offers excellent vibration
    dampening features and great mechanical and thermal stability.
    *The saddle and vertical head travels on hardened and precision ground box ways that offer maximum rigidity....

    View all products from Chung Sing Machinery Co., Ltd.

  • Vertical Milling Center

    Vertical Milling Machines image Koan Cho Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. Fully digital package control to provide high accuracy & high reliability.
    2. Massive meehanite cast iron for rigidity.
    3. Turcite surfaces + Hardened/ground slide way.
    4. Auto power off. 1. X-Y-Z-Travel: 1650 x 750 x 650mm.2. Table size: 600 mm x 1800 mm.3. Siemens 802D control easy-to-operate and progra....

    View all products from Koan Cho Machinery Co., Ltd.

  • CNC Milling Machines

    Vertical Milling Machines image Maxmill Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    Outstanding Features:
    *The column and bridge are annealed and stress relieved to ensure structural stability.
    *Linear guideways on X and Y axes, box ways on Z axis.
    *High precision pre-loaded linear guideways feature low frictional co-efficient low stick-slip and high thrust force sensitivity ensuring dynamic moveme....

    View all products from Maxmill Machinery Co., Ltd.

  • Variable Speed Vertical Milling Machine

    Vertical Milling Machines image CHUNG KUNG MACHINERY FACTORY

    The Spec Of Vertical Milling Machines :
    *Heavy duty milling machine CK-626I
    *Variable speed frequency drive allows speeds from 200 to 2250RPM
    *Fold up safety handles
    *Head tilts to 90o both ways. 360o rotation on horizontal surface.
    *Lower noise and convenient operation
    *Table locks for high rigidity
    *Cast iron construction through out machine
    *Forwar....

    View all products from CHUNG KUNG MACHINERY FACTORY

  • Geared Head Drilling/Milling Machines

    Vertical Milling Machines image Handy-Age Industrial Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. Available for milling, boring, drilling, tapping and etc.
    2. Gear head can be tilted 90° right 4 left each.
    3. Clutch operated micro down feed.
    4. The headstock is composed 11 pieces precision of gear (all 20.mm pitch) and all immersed in oil bath.
    5. Available CE standard as fig shows such as: control system, ....

    View all products from Handy-Age Industrial Co., Ltd.

  • Vertical Machine Centers ( Central Machinery)

    Vertical Milling Machines image Shenzhen Joint Industry Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. Mehanite cast.
    2. Taiwan C3 grade sealed ball, leading screw, spindle.
    3. Every machine is checked by Renishaw laser and ball bar.
    4. Control system: Fanuc, Mitsubishi.
    5. The fourth axis is optional.
    6. 16 pcs tool magazine is optional.
    7. X, Y axis hard ways.
    8. Lineral way and high speed are available.

    View all products from Shenzhen Joint Industry Co., Ltd.

  • CNC Milling Machine

    Vertical Milling Machines image Kao Fong Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. Ultra-wide A-shaped Column Design
    2. Full support Base Design
    3. Ultra-wide Y-axis Design

    View all products from Kao Fong Machinery Co., Ltd.

  • Turret Type Vertical Horizontal Milling Machines

    Vertical Milling Machines image Jinn Jye Precise Machine Factory Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. Ball screws on X,Y-axis.
    2. DC servo motor drives on X,Y,Z-axis with variable feed speeds. Working table:
    1. Working surface of table: 1300 x 305 mm2.
    2. Longitudinal travel: 900 mm.
    3. Cross travel: 400 mm.
    4. Vertical travel: 460 mm.
    5. Longitudinal cross feeds: 10 x 1500 mm2
    6. Rapid longitudinal cr....

    View all products from Jinn Jye Precise Machine Factory Co., Ltd.

  • Turret Milling Machine

    Vertical Milling Machines image FALCON MACHINE TOOLS CO., LTD.

    The Spec Of Vertical Milling Machines :
    The FM-4VKH model high quality, low cost milling machines have been built by CHEVALIER to meet the demanding needs of machine toolindustry. The slideways of table, knee and column are hardenedand ground for accurate, smooth and wear resistant slidewaysystems. The upper and lower surfaces of the saddle arelaminated with....

    View all products from FALCON MACHINE TOOLS CO., LTD.

  • Vertical Milling Machine

    Vertical Milling Machines image CHUNG KUNG MACHINERY FACTORY

    The Spec Of Vertical Milling Machines :
    *Adjustable table stops for accurate stops for cuts and repeatability
    *Head titls to 90. Both ways 360. Roation on horizontal surface
    *Scrapping technology X, Y, Z
    *Ps. The scrap technology is considered as the fundamental of the accuracy of precision machine tools
    *Hardened & ground column and knee slideways
    ....

    View all products from CHUNG KUNG MACHINERY FACTORY

  • Vertical Milling Machine

    Vertical Milling Machines image Top-One Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    •HEAVY DUTY MODL.
    •50"X10" TABLE.
    •5HP MOTOR.
    •Powered table elevation, with saftey switch.
    •Electric control box.
    •Halogen work lamp.
    •Auto-lubrication.
    •Meehanite castings.
    •Hardened & ground cross slide way and table.
    •Chrome hardened, ground quill.
    •High precision 7010 ....

    View all products from Top-One Machinery Co., Ltd.

  • Vertical Milling Machine

    Vertical Milling Machines image Top-One Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    •50"x10" TABLE.
    •3HP MOTOR.
    •Meehanite castings.
    •Hardened & ground cross slide way and table.
    •Chrome hardened, ground quill.
    •High precision 7207 CP4 spindle bearings.
    •Turcite-B coated on the cross and longitudinal way.
    •Dovetail way X,Y Z axis.

    View all products from Top-One Machinery Co., Ltd.

  • CNC Bed Type Milling Machine

    Vertical Milling Machines image TRUPRO-TEC Industrial Co., Ltd.

    The Spec Of Vertical Milling Machines :
    * 12”×50” table.
    * 5HP inverter motor.
    * NST#40 spindle.
    * Turcite-B coated on XY slide-way & gibs.
    * XYZ slide-ways, table and T-slot are hardened and ground.
    * X&Y motor bracket protect axis motors from damage.
    * Precision ground ball screws on XYZ, provide high precision movement and reduce heat d....

    View all products from TRUPRO-TEC Industrial Co., Ltd.

  • Bed Type Turret Vertical Milling Machines

    Vertical Milling Machines image Jiuh Yeh Precision Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. Integrated automatic lubricating system.
    2. Cooling system.
    3. Each travel axis is equipped with limit switches to ensure safety.
    4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
    5. The x, y axis slideways coated with low-friction property materia....

    View all products from Jiuh Yeh Precision Machinery Co., Ltd.

  • Bed Type Vertical & Horizontal Milling Machines

    Vertical Milling Machines image Jiuh Yeh Precision Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    * The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
    * All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
    * The X, Y axes are protected by stainless steel telescopic covers.
    * The X, Y axis d....

    View all products from Jiuh Yeh Precision Machinery Co., Ltd.

  • Bed Type Vertical & Horizontal Milling Machines

    Vertical Milling Machines image Jiuh Yeh Precision Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. All models can be converted into CNC controlled system.
    2. The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
    3. All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
    4. The X, Y axes are pro....

    View all products from Jiuh Yeh Precision Machinery Co., Ltd.

  • Horizontal Vertical Turret Milling Machines

    Vertical Milling Machines image Jiuh Yeh Precision Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    * The machine column is manufactured from high quality cast iron
    FC-30, tempered for long term accuracy. FC-30 cast iron table is tempered, hardened and precision ground.
    * The spindle is precision machined from SCM-21 alloy steel. tempered and carbon treated, ensuring maximum stability for heavy duty cutting.
    * X a....

    View all products from Jiuh Yeh Precision Machinery Co., Ltd.

  • Horizontal Vertical Turret Milling Machines

    Vertical Milling Machines image Jiuh Yeh Precision Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    * The machine column is manufactured from high quality cast iron
    FC-30, tempered for long term accuracy. FC-30 cast iron table is tempered, hardened and precision ground.
    * The spindle is precision machined from SCM-21 alloy steel. tempered and carbon treated, ensuring maximum stability for heavy duty cutting.
    * X a....

    View all products from Jiuh Yeh Precision Machinery Co., Ltd.

  • JY-V520 Bed Type CNC Vertical Milling Machines

    Vertical Milling Machines image Jiuh Yeh Precision Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    * Integrated automatic lubricating system
    * Cooling system
    * Each travel axis is equipped with limit switches to ensure satety.
    * The X,Y axis sideways coated with low-friction property material TURCITE-B
    * Standard electrical and electronic components are adopted.
    * Electrical and electronic circuits are properl....

    View all products from Jiuh Yeh Precision Machinery Co., Ltd.

  • JY-VH650B Bed Type CNC Milling Machine

    Vertical Milling Machines image Jiuh Yeh Precision Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    * The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
    * All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
    * The X, Y axes are protected by stainless steel telescopic covers.
    * The X, Y axis d....

    View all products from Jiuh Yeh Precision Machinery Co., Ltd.

  • Linear Ways Series VMC

    Vertical Milling Machines image Top-One Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. X, Y, Z axis travel: 560 x 400 x 400 mm
    2. BT40 spindle taper
    3. The direct drive spindle provides 10,000/12,000/15,000 rpm
    4. Linear ways on X, Y, Z axis
    5. 16 Tools arm type automatic tool changer
    6. Fully enclosed splash guard
    7. Fanuc/Mitsubishi control system
    8. Spindle cooler is standard equipment

    View all products from Top-One Machinery Co., Ltd.

  • Vertical Machining Center - Linear Ways Series

    Vertical Milling Machines image Top-One Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    1. X, Y, Z axis travel: 1100 x 520 x 560 mm
    2. BT40 spindle taper
    3. Belt drive: 8,000 rpm (standard)
    Direct drive spindle provides 10,000/12,000/15,000 rpm (Option)
    4. Linear ways on X, Y, Z axis
    5. Arm type: 20/24 Tools
    6. Fully enclosed splash guard
    7. Fanuc/Mitsubishi control system
    8. Spindle cooler is....

    View all products from Top-One Machinery Co., Ltd.

  • Step Speed Head Vertical Milling Machine

    Vertical Milling Machines image Top-One Machinery Co., Ltd.

    The Spec Of Vertical Milling Machines :
    HEAVY DUTY MODEL.
    HIGH COLUMN.
    54"X12" TABLE
    5HP MOTOR.
    Powered table elevation.
    Electric control box with saftey switch.
    Halogen work lamp.
    Auto-lubrication.
    Meehanite castings.
    Hardened & ground cross slide way and table.
    Chrome hardened, ground quill.
    ....

    View all products from Top-One Machinery Co., Ltd.

Copyright © 2017, G.T. Internet Information Co.,Ltd. All Rights Reserved.