T-Jaw Machinery Works Co., Ltd.

Taiwan Manufacturers, Exporters.

Products

Vertical Bandsaw With Auto-Sliding Table

Vertical-Bandsaw-with-Auto-Sliding-Table

  • Model No: MODEL 450D
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

*Infinitely variable speed.
*The band tension is cushioned.
*Blade welder and grinder are front mounted for quick, accurate blade repair and installation.
*Interchangeable rubber bonded saw wheels.
*Brush for cleaning lower drive wheel.
*Manintenance-free airpump provides air to remove chips from the point of cut.
*The upper wheel could be adjusted for band tensioning.
*Hand wheel controlled speed.
*Adjustable saw blade guides.
*Machine light is fitted.
*Change speeds while the machine is in operation, without stopping, without pulley changes.
*Cast iron frame to minimize machine vibration.
*The machine is with a device for automatic linear cutting.
*Work table may take speedy reverse movement.
*Moton of work table is controlled by stepless speed controller.
*Work table is with auto stoppers.

Specification :

SPECIFICATIONmm (in.)
Height Under Guide215mm
8-1/2"
Throat, Band to Column450mm
18"
Blade Speed25-117m/min
82-384ft/min
Blade Width3-15mm
1/8"-5/8"
Blade Length3570mm
140-1/2"
Size of Table565×500mm
22-1/4"×19-5/8"
Tilt, Main Table5° R, 5° L
Motor1HP
N0. of "T" Slots in TableNone
Table Stroke235mm
9-1/4"
Table Feed OperationElectric Powered
Machine Size1030×950×1870mm
40-1/2"×37-3/8"×73-5/8"
Net Weight410kgs
902lbs
Ship Weight490kgs
1078lbs
Packing Size1130×700×2050mm
44-1/2"×27-1/2"×80-3/4"

T-Jaw Machinery Works Co., Ltd.

  • Taiwan
  • No. 13, Kung Jiou Rd., Jih Nan Li, Ta Chia Dist., Taichung City 437, Taiwan
  • 886-4-26813864
  • 886-4-26815055