•Working table is an electronic magnet, it can attract and release work-piece quickly.
• With revolveable locating device, more precision and faster for replacement of cutters working at the same hole.
• Could be installed with revolveable cutters table for fast replacement of cutters.
•With Withdraw free and withdraw end function for tapping. Depends on different needs of different work-pieces, users could choose one for working.
•The seat of drilling handless is adjustable is adjustable, users could adjust the angle of drilling handles for convenience of working.
•Drill sleeves, tapping adaptors and borer holder are all with rapid adaptor, very convenient for replacement of cutters.
•Tapping adaptors with torsion control, tap bits are protected from being twisted off.
•With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
•With Voltage indicator, users could know power condition any time.
|Distance Of Spindle End to Base Plate||725mm|
|Distance Of Spindle End to Table Top||450mm|
|Diameter Of Column||80mm|
|Diameter Of Table||330mm|
|Base Working Area||440x300mm|
|Torsion Fixture Standard Fitting||6|
|Drill Sleeve Standard Fitting||3|