1. X, Y, Z axis travel: 560 x 400 x 400 mm
2. BT40 spindle taper
3. The direct drive spindle provides 10,000/12,000/15,000 rpm
4. Linear ways on X, Y, Z axis
5. 16 Tools arm type automatic tool changer
6. Fully enclosed splash guard
7. Fanuc/Mitsubishi control system
8. Spindle cooler is standard equipment
MODEL | UNIT | MCV-L540 | |
---|---|---|---|
TABLE | Working surface | mm | 420 x 700 |
T-Slots (mumber x size x pitch) | mm | 3 x 14 x 100 | |
Max. table load | kg | 300 | |
TRAVEL | Longitudinal travel (X) | mm | 560 |
Cross travel (Y) | mm | 400 | |
Headstock travel (Z) | mm | 400 | |
Distance between spindle end and table top | mm | 325~725 (with raiser) / 130~530 (Standard type) | |
SPINDLE | Type of tool shank | BT40 | |
Spindle speeds | rpm | DDS 10000 (std.) / 12000, 15000 (opt.) | |
Spindle speed range | 1 | ||
Spindle cooling / Lubrication method | Oil / Grease lubrication | ||
FEED | Cutting feed | mm/min | 1 ~ 10000 |
Rapid traverse (X/Y/Z) | m/min | 36 / 36 / 30 | |
Minimum input increment | mm | 0.001 | |
ATC | Type | Arm | |
Tool holder | BT40 | ||
Tool storage capacity | tools | 16 / 20 | |
Max. tool weight | kg | 8 | |
Max. tool dia. of adjacent pots are empty | mm | 150 | |
Tool selection | Random | ||
Tool change time | sec | 3 | |
MOTOR | Spindle motor | kw | 7.5 |
X axis | kw | 1.6 | |
Y axis | kw | 1.6 | |
Z axis | KW | 3.0 | |
INSTALLATION REGUIREMENT | Power | KVA | 15 |
Voltage | V | 220V / 50Hz | |
Pneumatic pressure | kg/cm2 | 6~8 | |
Pneumatic flowrate | I/min | 100 | |
Floor space | mm | 1850 x 2290 x 2650 | |
Net weight | kg | 2800 |