Kuhnway Corporation

Taiwan Manufacturers, Exporters.

All Products

Electric Actuators
  • Model No:
    MK Series
  • Product Description:
    1. Power plant.
    2. Water treatment.
    3. Damper control equipment.
    4. Refrigerating, air- conditioning system.
    5. Air transfer equipment.
    6. Food industry.
    7. Petro-chemical industry.
2 Way Solenoid Valves
  • Model No:
    MG-10
  • Product Description:
    1. Direct Acting
    2. Coil: Winding coil with flying leads.
    3. Valve's body: Zinc alloy.
    4. Normally Closed.
2 Way Solenoid Valves
  • Model No:
    MA-10~15
  • Product Description:
    1. Kick pilot.
    2. Coil: Winding coil with flying leads.
    3. Valve's body: Brass.
    4. Normally Closed.
2 Way Solenoid Valves
  • Model No:
    MK-32FS
  • Product Description:
    1. Kick pilot.
    2. Coil: M20, molding coil with terminal box.
    3. Valve's body: Bronze.
    4. Normally closed.
2 Way Solenoid Valves
  • Model No:
    MD-10~50WAG
  • Product Description:
    1. Kick Pilot.
    2. Coil: Winding coil with flying leads.
    3. Valve's body: Brass (MD-10~25). Bronze (MD-32~50)
    4. Normally Closed.
2 Way Solenoid Valves
  • Model No:
    MK-15S
  • Product Description:
    1. Kick pilot.
    2. Coil: Winding coil with flying leads.
    3. Valve's body: Bronze.
    4. Normally closed.
2 Way Solenoid Valves
  • Model No:
    MS-0825-8NL
  • Product Description:
    1. Direct Acting
    2. Coil: Winding coil with flying leads.
    3. Valve's body: Nylon.
    4. Normally Closed.
2 Way Solenoid Valves
  • Model No:
    MT-32FS~50FS-(M17)
  • Product Description:
    1. Pilot operated.
    2. Coil: winding coil with flying leads (standard), Molding coil with terminal box on request.
    3. Valve's body: Bronze.
    4. Normally Closed.
2 Way Solenoid Valves
  • Model No:
    MK2-0530-8C
  • Product Description:
    1. Connection: PT 1/4".
    2. Orifice(min): 3.
    3. Power consumption VA: 22.
2 Way Solenoid Valves
  • Model No:
    MD-10C~50C
  • Product Description:
    1. Pilot operated.
    2. Coil: Winding coil with flying leads.
    3. Valve's body: Brass.
    4. Normally open.
    5. NPT on request.
Angle Valve Water Hammer Arresters
  • Model No:
    ATX-15/ 20
  • Product Description:
    This design of angle valve style water hammer arrester is special for normal resident application. The air bag is set up of the angle valve. It can match with the bathroom system and is easy to install. Its excellent result can maintain the tranquili...
Direct Activated Pressure Reducing Valves
  • Model No:
    STAINLESS STEEL 316/ THREAD TYPE
  • Product Description:
    1. Valve Body is made by Stainless Steel #316, suitable for fluid, Air and Vapor.
    2. The gate is designed for opening status, which will not influence the water supply function under unstable inlet pressure condition.
    3. When the outlet pressure r...
Direct Activated Pressure Reducing Valves
  • Model No:
    CAST IRON / FLANGE TYPE
  • Product Description:
    The gate adopts NO design, hence water supply will not be affected due to instability in inlet pressure. The internal pressure control chamber adopts design, hence the function and life-time will not be affected by water impurity. Besides, there is n...
Float Valves
  • Model No:
    N/A
  • Product Description:
    Float valve uses a sub-valve (floating ball switch) to control the main valve. When the water level elevates tothe full water level defined by sub-valve (floating ball switch), the sub-valve (floating ball switch) closes and back pressure inside the ...
Solenoid Control Valves
  • Model No:
    N/A
  • Product Description:
    Solenoid control valve is a kind of isolation valve, which can substitute traditional gate valves, ball valve and butterfly valves. The gate functioning is easily controlled by electrical power. The valve can be installed in fire control facility, wa...
Back Pressure Valves
  • Model No:
    N/A
  • Product Description:
    1. The whole set is made by stainless steel #316, and it is suitable for the fluid of pure water, acid & alkaline fluid, vapor or air.
    2. Back pressure valve can maintain required pipeline pressure and flow, and also release over high pressure.
    3...
Pressure Relief Valves
  • Model No:
    N/A
  • Product Description:
    1. Pressure relief valve is installed on the outlet pipe of water supply pipeline. It can maintain safe water supply pressure inside the pipe and prevent pipeline and equipment damage caused by accidental escalation in water pressure.
    2. When water ...
Ball Control Valves
  • Model No:
    N/A
  • Product Description:
    1. MK 7 actuator is fit assembling with 2 way / 3 way ball valves.
    2. Material of ball valve can be FC 20, SUS 304, or SUS 316.
    3. Acting of ball 7 seconds from close position to open position.
    4. Pressure range from 0to 10 kg*f cm2.