Description :

The gate adopts NO design, hence water supply will not be affected due to instability in inlet pressure. The internal pressure control chamber adopts design, hence the function and life-time will not be affected by water impurity. Besides, there is no leakage by this design. When the outlet pressure directly responds to pressure control chamber to adjust setting pressure the response is sensitive and adjustment can be very precise.

Specification :

1. RET50-F: Size: 2". Weight(kg): 11. H(mm): 150. L(mm): 190. CV: 21. 2. RET65-F: Size: 2.5". Weight(kg): 15. H(mm): 165. L(mm): 210. CV: 38. 3. RET80-F: Size: 3". Weight(kg): 17. H(mm): 200. L(mm): 225. CV: 55. 4. RET100-F: Size: 4". Weight(kg): 24. H(mm): 220. L(mm): 250. CV: 95.

Features :

1. Pressure adjusting range: 0.5~5 kgf/cm2, 3~8 kgf/cm2.
2. Valve body testing pressure: 21 kgf/cm2.
3. Maximum applied pressure: 12 kgf/cm2 (1 kgf/cm2= 14.2 psi).
4. Applied temperature: -15~80 degree C.
5. Special order is needed for oter material and specification.
6. Pressure gauge shows outlet pressure.

• 
  Direct Activated Pressure Reducing Valves
• 
  Pressure Relief Valves
• 
  Solenoid Control Valves
• 
  Angle Valve Water Hammer Arresters
• 
  Ball Control Valves
• 
  Float Valves
• 
  Back Pressure Valves