Tong Eann Shutters Co., Ltd.

Tubular Motor (AC/DC), Clutch Tubular Motor (AC), and Roller Door Motor (Side Motor).

All Products

12 / 24 Vdc Tubular Motor
  • Model No:
    TESC 50 SERIES
  • Product Description:
    When the rolling shutter is moving down, the tubular motor will automatically stop running with obstacles for protecting shutters from broken-down and the users’ security.

    It is convenient and comfortable only to operate on buttons by orders to do...
Shutter Pulleys
  • Model No:
    800 090 801~802
  • Product Description:
    Paint-coated material and there two different specification for manual use only. They are Pulley 145 and Pulley 180. It can make shutter lifted easilier.
RF Remote Controls
  • Model No:
    200 050 306
  • Product Description:
    1. Radio remote control (Group Control) for tubular motor and other type roller door motors.
    2. There are two wallmunt transmitters in this package.
    3. Leading technology design with anti-code function.
Bracket Sets
  • Model No:
    800 010 036~045
  • Product Description:
    1. Bracket set was accessory designed for side motor.
    2. It was a necessary accessory for side motor operation.
    3. Bracket set consists of gear chain, dummy ends, bearing and shaft.
    4. Bracket set was usually used for the weight of door under 500k...
Tubular Motors
  • Model No:
    R-SYSTEM
  • Product Description:
    R-System applies a highly reliable technology and has evolved to some of the most reliable products on the market today.
Roller Door Motors ( Side Motors)
  • Model No:
    800 010 036~100
  • Product Description:
    Characteristics of rolling door motors & operators:
    1. Side motor (like DS-30) has lifting capacity from 300kgs to 3000kgs, also with manual and electric operation. With other accessories to form into fire-proof shutters.
    2. With barrier detec...
Tubular Motors
  • Model No:
    DS & TE TYPE
  • Product Description:
    1. Tubular motors with low noise for projection screens, awnings, window roller shades, in diameter 35mm with torque from 3 ~ 15Nm, 15 ~ 30rpm; 45mm from 4 ~ 40Nm, 12 ~ 30rpm.
    2. R system like TE403-30R operated with mechanical limit switch, contro...
Remote Controls
  • Model No:
    200 050 507
  • Product Description:
    1. TESC radio remote control (Group Control) was design for tubular motor and other type roller shutter motors.
    2. It can control up to 15 motors and applied for remote control integrated in tesc tubular motors.
    3. Leading technology an...
Remote Controls
  • Model No:
    200 050 508
  • Product Description:
    1. Radio remote control (Individual Control) for tubular motor and other type roller door motors.
    2. Leading technology and model design with anti-code function and applied for remote control integrated in tesc tubular motors.
Push Bottom Switches
  • Model No:
    800 030 001
  • Product Description:
    1. Push bottom switch was popular applied for rolling door motor and other shutter operators.
    2. Colorful button design for easilier identify.
Remote Controls For Shutter Doors
  • Model No:
    HOP-2004TA
  • Product Description:
    1. Radio remote control (Individual Control) for rolling door motor use only.
    2. Leading technology and model design with anti-code function and
    applied for remote control integrated.
Sprocket Sets
  • Model No:
    800 010 700
  • Product Description:
    1. Sprocket was designed for the weight of side motor over 500kg.
    2. Sprocket consists of two gears, Chain, dummy ends, two bearings and shafts.
    3. It have to fix on steel board for operation.
Spring Wires
  • Model No:
    800 090 811
  • Product Description:
    1. It was designed for shutters and manual door.
    2. It can be operate with manual slats and other shutter system.
    3. Spring wire can make you lift shutters easier.
200RS Remote Controls
  • Model No:
    288RS
  • Product Description:
    1. Radio remote control (individual control) for tubular motor and other type roller door motors.
    2. Leading technology design with anti-code function.
104A Group Controls
  • Model No:
    200 050 104
  • Product Description:
    Radio AC multi remote control. It can control up to 4 tubular motors and simultaneous control motors by push bottom switch. Suitable for shutter control operators and other shutter system.
Plastic Bearings
  • Model No:
    200 351 005
  • Product Description:
    1. Plastice bearing was applied for end of tubular motor and it was usually screwed on the wall bracket.
    2. Plastic have to operate with end cap and they are usually applied on shutter operator system.
    3. Light shutter was suitable for plas...
288RB Remote Controls
  • Model No:
    200 050 288
  • Product Description:
    1. 288RB remote control was a integrated radio remote control(Individual Control) for tubular motor and other type roller door motors.
    2. Leading technology and model design with anti-code function.
Ø35/Ø45 Motor Pin Studs
  • Model No:
    200 351 007
  • Product Description:
    1. Ø35/Ø45 motor pin stud was designed screwed on the head of 35mm and 45mm tubular motor.
    2. It was suitable for blind or projection screen operation system.
    3. It can be screwed on wall bracket or fixed on the wall directly.
Ø44 Octagonal Aluminum Tubes
  • Model No:
    200 351 031
  • Product Description:
    1. Ø44 octagonal aluminum tube was designed for TESC 35mm tubular motor.
    2. It was operate with octagonal drive adapter.
    3. Tubular motor have to insert into aluminum tube, then it work.
    4. Length of tube will depends on width of your windo...
Ø35 Motor Pin Studs
  • Model No:
    200 352 001
  • Product Description:
    1. Ø35 motor pin stud was specialized for 35mm tubular motor use only.
    2. It was usually operate with bracket pin stud and used for light shutter operation system.
    3. Good motor pin system can make stable operation performance.
Mounting Studs
  • Model No:
    200 451 002
  • Product Description:
    1. Mounting stud was designed for tubular motor at the head of tube. 2. It was suitable for shutters and heavy operation system and it have to opoerate with motor square bolt pin stud.
    3. It can offer good and stable holding performance for opera...
Ø12mm Shaft Studs
  • Model No:
    200 451 008
  • Product Description:
    1. Ø12mm shaft stud was designed for install at the end of tube.
    2. It was suitable for blind or projection screen operation system for reduce gap between the wall.
    3. It can be screwed on wall bracket or fixed on the wall directly.
Ø12 Bearings For Tubular Motors
  • Model No:
    200 451 010
  • Product Description:
    1. Ø12 bearing was designed for tubular motor installed at the end of tube.
    2. It was suitable for shutter and heavy operation system.
    3. It have to opoerate with Ø28 bearing bracket and it can offer good lubricity performance for operating....
Ø65 Octagonal Aluminum Tubes
  • Model No:
    200 451 031
  • Product Description:
    1. Ø65 octagonal aluminum tube was designed for TESC 45mm tubular motor.
    2. It was operate with octagonal drive adapter.
    3. Tubular motor have to insert into aluminum tube, then it work.
    4. Length of tube will depends on width of your window.
    5. ...
Ø45 Motor Pin Studs
  • Model No:
    200 452 001
  • Product Description:
    1. Ø45 motor pin stud was designed screwed on the head of 45mm tubular motor.
    2. It was suitable for shutter operation system.
    3. It was usually applied for heavy shutter system and it can make power of motor performance smoothly.
Steel Wall Brackets
  • Model No:
    200351001
  • Product Description:
    1. Wall bracket suitable used for blind and shade operation system. 2. Wall bracket have to operate with bracket pin stud, motor pin stud at the head side of tubular motor and end cap, bearing at the end side of motor.
    3. All of the tubular m...
Shutter Locks
  • Model No:
    800 090 831
  • Product Description:
    1. Shutter lock was designed and installed for roller shutters.
    2. It was installed at the middle position of shutters.
    3. Offering simple anti-theft function for clients.
Ø28 Bearing Brackets
  • Model No:
    200 451 020
  • Product Description:
    1. Ø28 bearing bracket was designed for tubular motor installed at the end of tube.
    2. It was suitable for shutter and heavy operation system.
    3. It have to opoerate with Ø12 bearing and it can offer good holding performance for operating.