Standard Cylinders
- Model No:
IC
- Product Description:
Identical with ISO6431. High quality of aluminum tube provides a long service life. High quality seals prevents cylinder from leakage. Various sensors and accessories for your selection.
Stainless Steel Cylinders (Pneumatic Air Cylinders)
- Model No:
PC
- Product Description:
Identical with ISO6432φ12~φ25. Adjustable cushion at both ends absorbing high speed impact provides stable movement and non-vibration. Built-in permanent magnets for sensor use. Caps are rolled and polished precisely ensures a smooth, stable moment a...
ISO6432 Aluminum Cylinders
- Model No:
PCL
- Product Description:
1. Identical with ISO6432 standard.
2. Built-in magnet for sensor use.
3. Small volume, saving space.
Guide Cylinders
- Model No:
GCL, GCB
- Product Description:
1. Rod guide body equipped with ISO6431 standard cylinder for activation.
2. The body and cylinder connected by floating joint, free from scraping. Bearing could be changed according to special speed demand.
3. Linear bearing type is suitable for...
Jig Cylinders
- Model No:
JC
- Product Description:
Aluminum alloy with hard anodizing for high wear-resistant and anti-corrosion. Compact size saves space. Strict quality control ensure you a good performance. Easy maintenances and installation. Wide range optional specification for selection.
Mini Chucks
- Model No:
HPS/HYS
- Product Description:
Acting precisely and no vibration. Endurable and strong mechanism. SUS440C gripper provides a long life of product. Aluminum alloy body with hard anodizing for high wear-resistance and anti-corrosion.
Rodless Pneumatic Cylinders
- Model No:
ZS
- Product Description:
1. High-strength aluminum-extruded section to reduce deflection and increase the slot width.
2. Front and side wipers on the yoke.
3. Grooves in tube profile for fixing various assessors.
4. Fixation at the front can be turned by 4 x 90°.
5. New ...
Pneumatic Cylinder
- Model No:
AOF/AOL
- Product Description:
1. Air/Oil systems combine the speed and low cost of air operation with the smooth.
2. Hydraulic cylinder is motivated by standard air line source.
PIN CYLINDER
- Model No:
PJ6/PJ10; APJ6/APJ10
- Product Description:
Miniature size, short length, efficiently reduce installation space.
Full thread design on cylinder body, suitable for panel mounting and plug mounting.
Aluminum Pneumatic Cylinder
- Model No:
PCL/APCL/APDL (NO.40-14-05)
- Product Description:
* Identical to ISO6432 φ20 ~ φ25.
* Miniature size and space saving.
Stainless Steel Pneumatic Cylinder
- Model No:
PC/APC/APD Series (NO.40-14-04)
- Product Description:
-Identical to ISO6432 φ8 ~φ25.
-Adjustable cushion at both ends is able to absorb vibration from high speed impact and provide stable movement.
-Built in magnet for sensor use.
-Caps are rolled and polished; which provides stable quality.
-Stainl...
Standard Pneumatic Cylinders
- Model No:
IC Series (NO.40-14-01)
- Product Description:
-Identical to ISO6431 standard.
-High quality of aluminum tube provides a long service life.
-High quality of seals ensures leakage free.
-Various sensors for option.
-With adjustable cushions on both ends.
