CNC rotary tables are attachments for machining centers. It is known as the 4th axes in Taiwan. A good 4th axis must basically possess the characteristics of “indexing accuracy” and “repeated accuracy.” In order to achieve high accuracy, the 4th axes must have good warm gears and warm sets, as well as precision construction. Based on our nearly 50-year experience in producing high-precision gears, we are able to produce high-precision warm gears and warm sets. In addition, we specially purchased a CNC boring machining center from Toshiba, Japan to produce high-precision construction. Also, to ensure our quality, we developed an inspection software with the Mechanical Industry Research Lab (MIRL) at Industrial Technology Research Institute (ITRI). Due to the mentioned experience and new investment, we are able to produce major parts in house, under strict QA system in order to best control the quality. We deeply believe that our products can compete with those similar products made in Japan, USA, Germany and so on.
Pneumatics: SNCM 160, SNCM 210, SNCM 250
|Table center height (Vertical pos.)||mm||160||210||255|
|Table height (Horizonyal pos.)||mm||165||225||250|
|Center bore diameter||mm||ψ40h7||ψ40 h7||ψ40 h7|
|Speed reduction ratio||1/180||1/180||1/180|
|Cumulative indexing accuracy||sec||15||15||15|
|Number of teeyh on worm wheel||72||72||72|
|Table rotation speed (rpm Motor 2000)||rpm||11.1||11.1||11.1|
|Max. torque of worm gear (kg-m)||kg-m||48||78||170|
|Clamp method & clamp torque (kg-m)||kg-m||50|
|Load capacity, horizontal (kg)||kg||250||350||500|
|Load capacity, vertical (kg)||kg||100||150||200|
|Table gyration angle per 1 pulse||kg||105||175||250|
|Net weight (kg)||mm||160||210||255|
|Central Height of tailstock||250||320||400|
1. High Performance With The Same As Those Leading Brands Of The U.S.A., Japan, And Europe.
2. Duplex Lead Worm Gear Sets Inside.
3. High Clamping Force To Ensure The Stability, Especially In Heavily Cuttings.
4. Adopting High-Class Taper Roller Bearings.
5. Using Clamped-And-Unclamped Limit Switch.
6. Two Ways For Indexing.
7. Being Easily Placed In Both Vertical And Horizontal Directions.
8. Compatible With Any Brand Of CNC Servo-Motors.