The GT series grid-connected Photovoltaic Inverter is delivered in a waterproof IP65 enclosure which can be installed in either a grid connected solar tracker system or a stationary PV system. By taking care of an accurate power conversion from solar panel to local grid; the GT series effects conversion process with minimal power loss and maximum reliability.
Model Item | PM-3000GT | |
Inverter Technology | Conversion Mode | Sine-wave; Current source; High frequency PWM |
Isolation Method | Transformer-less Design* | |
DC Input Data | ||
Nominal DC Voltage | 360 VDC | |
Max. DC input Voltage | 500 VDC | |
Working range | 120VDC~500VDC** | |
Max DC input current (Each MPPT Tracker) | 22 Amp | |
MPPT Range | 150 VDC ~ 450 VDC | |
MPPT Tracker | 1 | |
AC Output Data | ||
Nominal AC Power | 3000 | |
Max. AC Power | 3300 | |
Nominal AC Voltage | AC 230V | |
Output Connect Method | 1-Phase / 2-Wires(L; N; G) or 1-Phase / 3-Wires(L1; L2; G) | |
AC Voltage Rang | 184~264.5Vac(Base on 230 Vac) | |
Nominal AC Current | 13 Amp | |
Frequency | 50/60Hz Auto-Selection (47.5 ~ 50.2 Hz or 59.3 ~ 60.5 Hz) | |
Power Factor | >0.99 with nominal AC current | |
Current Distortion | Total Harmonic current : Less than 5% Single Harmonic current : Less than 3% | |
Efficiency Data | ||
Max. efficiency | >96% | |
Euro efficiency | >94% | |
CEC efficiency | >94% | |
Environmental | ||
Operating Temperature | -25 °C ~ +50 °C | |
-13 °F ~ 122 °F | ||
Humidity | 0 to 90%(Without condensation) | |
Altitude | 0 ~ 2000 M / 0 ~ 6600 ft | |
Mechanical | ||
Dimensions (H x W x D in mm ) | 455 x 430 x 170 | |
Weight (Kgs / Lbs) | 23 / 51 | |
Protection Class | IP65; outdoor | |
Cooling | Free Convection | |
AC Connector | Terminal | |
DC Connector | Multi-Contact | |
Communication | ||
Communication Interface | RS232 | |
USB; RS485; Dry contact; TCP/IP | ||
Front Panel | ||
LCD | Boost input Voltage/Boost input Current/Boost input Power/AC output Voltage /AC output frequency/AC output current /AC output power/AC Energy yield/Inner Temperature/Heat sink Temperature /Status message/ Error message | |
LED | Leakage current fault or DC input isolation fault | |
Spec. of Utility is not matches with the Utility specifications of the inverter | ||
Solar Cell power is greater or smaller than sleep power | ||
Key Pad | UP key/ Down key/ Function key/ Enter key | |
Protection | ||
Utility | Over/under Voltage; Over/under Frequency; Ground fault; DC Isolation fault | |
Islanding operation detection | Passive : Voltage phase jump detection Active : Reactive power control | |
Over Temperature | reduced output power | |
Certification | ||
Safety | VDE0126-1-1; EN50178; IEC62103 | |
UL1741; IEEE1547 | ||
EMI/EMC | EN 61000-6-1; EN 61000-6-2; EN 61000-6-3; EN 61000-6-4 |
Two built-in Independent MPPT Boosters increase overall efficiency
Convectional Cooling System provided to guarantee quiet operation
Compact Size; Light Weight
Up to 95% high conversion efficiency
Advanced DSP Control Technology delivers accurate data
Ease of Installation to Save Time and Money
Mimic LCD Display
IP65 Cabinets for both Indoor and Outdoor Applications
Optional Monitoring Software provided to offer operational status and electricity generated data