Myday Machinery Inc.

Taiwan Manufacturers, Exporters.


CNC 4 Guide-way Giant Lathe


  • Model No: TNC-1800/2000/2500
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

4 Guide-way CNC Giant Lathe is a special type of flat bed lathe. It has one wide bed and 2 pairs of guide ways. Its tailstock and steady rests are placed on the pair of guide ways at the rear side. Thus, we would build the carriage across the 4 guide ways (called full length cross slide) as standard model; this model could stand for very heavy duty machining and has full cross slide travel.

Besides, we could build its carriage on one pair of guide way at the front side (called half length cross slide). In this option, the carriage wouldn’t interfere with steady rests and its tailstock; it’s very good at outer diameter machining at one time without removing steady rests.

Specification :

CNC Giant Heavy Duty Lathe : 52" bed Specifications
Description \ ModelTNC-1800TNC-2000TNC-2500
Swing over bed1800 mm2000 mm2500 mm
Swing over cross-slide (Full length) ※1250 mm1440 mm1920 mm
Swing over cross-slide (Half length) ※1400 mm1600 mm2050 mm
Center height900 mm1000 mm1250 mm
Bed width1345mm (52.9”)
Distance between centers3000 mm (120”) ~ 12000 mm (480”)
Full Length cross-slide travel X-axis: 1250mm, Z-axis: 2600~11600mm
Half Length cross-slide travelX-axis: 720mm, Z-axis: 3000~12000mm
Spindle bore / Spindle nose Ø230mm / A2-15
Spindle speeds (4 Steps) 5 ~ 460 rpm
Spindle motor45/55KW (60/75KW Opt.)
Number of tool stationsHorizontal 4Vertical 8
OD Tool shank cross section 50 mm × 50 mm32 mm × 32 mm
ID Tool shank diameter Ø60, Ø63, Ø80mm(opt.)
Cutting feed rate (per rotation)X-axis: 0.001-250 mm , Z-axis: 0.001-400 mm
Rapid travel X-axis: 5 m / min , Z-axis: 5 m / min
Tailstock spindle travel / Quill 300 mm / Ø290 mm (Rotary)
Tailstock spindle taper MT#7
Controller FANUC 0i-TD FAGOR 8055i
X-axis servo motorα22i (4.0 KW) FXM 74 (5.3 KW)
Z-axis servo motor α30i (7.0 KW)FXM 75 (7.3 KW)
X-axis transmissionBall Screw Ø50mm with 1:2 gear set
Z-axis transmissionBall Screw Ø80mm(BC 3~4M), Ø100mm (BC 5~6M),
Rack and Pinion (BC 7~12M)
Hydraulic pump motor 7.5KW
Coolant pump motor 1.0KW
Machine Weight
(3 meter BC)
 33000kgs 34500kgs 37000kgs
Weight per extra meter 4500kgs
※ Full Length or Half Length Cross Slide design depends on customers’ choice.

CNC controller: FANUC 0i-TD or FAGOR 8055i4-jaw chuck
AC Spindle MotorFace plate
Spindle oil coolerSteady rest
Auto lubrication systemLocating Hydraulically
Coolant systemBoring device
H4 or V8 hydraulic turretHydraulic Tailstock
Work lightC-axis Control C
Chuck guard and Turret guard, Control Panel moving along with CarriagePower Turret
Rear Splash Guard and chip conveyor (DBC≦8 meter) 
Adapter sleeve and Tool centers 
Tailstock rotary quill 
Leveling bolts & Pads 
Tool box with oiler, spare fuse, paint & tools 
Operation & Service manual 

Related Prodcuts

Myday Machinery Inc.

  • Taiwan
  • No.112-53, Cingguang Rd., Wurih Dist., Taichung City 41462, Taiwan
  • 886-4-23351313
  • 886-4-23352259
  • 658625538