* Adopted patented disk hydraulic clamping system. It can assure heavy and steady cuttingwithout any deviation from the centre.
* The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical eciency of power transmission, high indexing accuracy, and easy adjusted on the backlash.
* Driven by the servo Motor. Eciently in position, high accuracy, low noise and suitable for any angels working piece.
* It can be added with air booster or hydraulic unit.
* It can be connected with CNC machine as a 4th Axis or matched with Single Axis Controller as an additional Axis.
|Use Method||Horizontal Special-Purpose|
|Clamp Method||Hydraulic 35Kg/cm2|
|Spindle Through Hole Diameter||NO|
|Faceplate Centre Hole Diameter||Ø400mm|
|Faceplate T-Slot Width||18H7mm|
|Servo Motor||• FANUC||α12/α12i/α22i|
|Total Speed Reduction Ratio||1/180|
|Min. Increment Unit||0.001°|
|Indexing Accuracy||20 (Arc. Sec.)|
|Repeatability||4 (Arc. Sec.)|
|Max. Torque Capacity of Worm Gear||450kgf/m|
|Max. Workpiece of Capacity||• Horizontal||1500KGS|
|Net Weight (Without motor)||950KGS|