657071650

Di Chun Iron Work Co., Ltd.

Tel:886-4-2358-5879       Fax:886-4-2358-3695
Address:NO. 7, Jingke 1st Rd., Nantun Dist., Taichung City 408, Taiwan

All Products

3-Jaw Strong Scroll Chucks (D1 Camlock Direct Mounting & 2-Piece Jaws)
  • Model No:
    KA
  • Product Description:
    1. Gripping accuracy of 0.03mm (0.0012inch)T.I.R.
    2. Standard accessories chuck wrench and hex. key. One set of mounting bolts. (unc-bolts)
    3. The body is made of meehanite MEEHANITE. It is suitably used for high speed revolution and 3 times more...
Vertical And Horizontal Stationary Power Chuck
  • Model No:
    DV/DN
  • Product Description:
    * Suitable for vertical milling and drilling operations.
    * With large through-hole, Vertical / horizontal power chucks does not only clamp the long workpiece but also the horizontal holding.
2-jaw and 4-jaw wedge type Non Through-hole Power Chuck (adapter excluded)
  • Model No:
    VT & VIT
  • Product Description:
    ◾Suitable for special applications :
    Used to hold special shape work pieces, such as square bar or flanges which is not possible clamping by 3 jaw chuck.
    ◾Interchangable with V or VA series.
    ◾Basic dimensions are the same as V type.
    ◾High perfor...
Large Wedge Type Non Through-hole Power Chuck
  • Model No:
    V(40" - 79")
  • Product Description:
    * Chucking operations of very large components external or internal clamping.
    * Suitable for vertical lathe, due to the front protection of slide way.
    * Master jaw with manual radial setting function.
Hydraulic Cylinder Coolant Collector
  • Model No:
    CM.B
  • Product Description:
    ◾Hydraulic cylinders coolant collectors. Compact and light weight, they feature bore sizes up to 20% large than Conventional Cylinders.
    Precision finished piston bores and cool running rotary unions are
    included for years of trouble-free performa...
Non Through-hole Compact Rotary Hydraulic Cylinder
  • Model No:
    MR
  • Product Description:
    ◾Light weight design can reduce the spindle loading for vertical lathe application.
    ◾Built-in check valve and proximity switch brackets.
    ◾Developed for rear locking installation.
Non Through-hole Rotary Hydraulic Cylinder (valve included)
  • Model No:
    MS
  • Product Description:
    ◾Built-in safty check valves.
2-jaw Through-hole Power Chuck
  • Model No:
    NT-200
  • Product Description:
    ◾All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each base jaw.
    ◾Base jaw : 1.5mm x 60° serration.
    ◾Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA B5.9 type A...
Strong Finger Chuck
  • Model No:
    F66A8
  • Product Description:
    High speed and light weight type strong finger chuck for aluminum wheel:
    * All sliding surfaces are hardened and ground for accurate actual running and long service repeatability.
    * Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA, B5-9 ty...
Non Through-hole Rotary Hydraulic Cylinder
  • Model No:
    MS250C/MS300C
  • Product Description:
    Non through-hole rotary hydraulic cylinder (valve and switch brackets included):
    1. Through-hole for coolant, oil or air with thread for rotary unit.
    2. Mounting from the rear or front side.
    3. Built-in safety check valves and bracket for proximit...
Super High Speed Through-hole Compact Rotary Hydraulic Cylinder
  • Model No:
    MM Series
  • Product Description:
    1. Compact hydraulic cylinder design with light weight can reduce the spindle loading while running in high speed.
    2. Built-in check valve in safety auto lock and pressure relief valve in case of power failure occur.
    3. New model developed for rear...
Scroll/ Chuck Jaw
  • Model No:
    SC
  • Product Description:
    3-jaw scroll chuck plain back, solid jaws (front and back mounted)
    * Interchangable utilization of internal and external hard jaws.
    * SC types feature economical and durable, suitable for mass production.
    * Gripping accuracy of 0.03mm (0.0012 in...
Power Chuck
  • Model No:
    N-200
  • Product Description:
    3-jaw through-hole power chuck (adapter excluded)
    * More large bore:
    The largest bore in wedge type power operated chucks.
Collet Chuck
  • Model No:
    CR
  • Product Description:
    Collet chuck for cylindrical center mount
    * Collet chucks with bayonet catch are mainly used for chucking bar work on NC / CNC lathes.
    * The bar can be fed in through the chuck.
    * Profiles can also be chucked with the appropriate collets.
Hydraulic Cylinders
  • Model No:
    M
  • Product Description:
    High speed through-hole rotary hydraulic cylinder
    * Compact and light weight :
    Comparing with the regular product, it is compact (reduced to MAX 95mm) and lighter (weighted MAX 4.5kg). It’s more stable to reduce
    the burden of the machine...
Soft Jaw
  • Model No:
    SKC
  • Product Description:
    Soft jaw for strong scroll chuck
    * Soft jaws for strong scroll chuck.
    * Manufactured in special specification.
Hard Jaw
  • Model No:
    HJ
  • Product Description:
    Hard jaw for hydraulic power chuck
    * Hard jaw for hydraulic power chucks.
    * Hard jaw for CNC lathe.
Special Purpose Power Chucks
  • Model No:
    F52
  • Product Description:
    High speed and light weight type strong finger chuck for aluminum wheel
    * All sliding surfaces are hardened and ground for accurate actual running and long service repeatability.
    * Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA, B5-9 typ...
Adapter
  • Model No:
    N/A
  • Product Description:
    Mounting adapter
    * Mounting adapter on short taper spindle noses DIN55026
T-NUTS
  • Model No:
    N/A
  • Product Description:
    T-NUTS
    * Suitable for power chuck
Super High Speed Through-hole Compact Rotary Hydraulic Cylinder
  • Model No:
    MK
  • Product Description:
    1.The compact hydraulic cylinder which is shorten the length about 30% and light weight can reduce the spindle loading while running in high speed.
    2.Built-in check valve in safety auto lock and pressure relief valve in case of power failure occurs....
Extra Large Through-hole Rotary Hydraulic Cylinder
  • Model No:
    ML-CM.B
  • Product Description:
    * Matching for large bore power chucks.
    * Special aluminum alloy steel body, light weight for reducing the spindle loading.
    * Within check valves to maintain the thrust force.
    * Extra large bore design, equipped with coolant collector and detectiv...
Non Through-hole Power Chuck For Vertical Lathe
  • Model No:
    VRA
  • Product Description:
    * The front protection of slide way.
    * Suitable for vertical lathe.
Collet Chuck For Short Taper Mount
  • Model No:
    CRA
  • Product Description:
    * Collet chucks with bayonet catch are mainly used for chucking bar work on NC / CNC lathes.
    * The bar can be fed in through the chuck.
    * Profiles can also be chucked with the appropriate collets.
Pneumatic Power Chuck
  • Model No:
    PB-ES(375)
  • Product Description:
    * Air chuck for external clamping with built-in pneumatic cylinder.
    * Fast and clamping jaw stroke.
    * Clamping pressure control.
    * Clamping stroke control.
Pneumatic Power Chuck
  • Model No:
    PB-ES(275)
  • Product Description:
    * Air chuck for external clamping with built-in pneumatic cylinder.
    * Fast and clamping jaw stroke.
    * Clamping pressure control.
    * Clamping stroke control.
Strong Finger Chucks ( Aluminum Wheels)
  • Model No:
    F61
  • Product Description:
    1. All sliding surfaces are hardened and ground and ground for accurate actual running and long service repeatability.
    2. Mounting: adaptor mounting to fit with DIN, ISO, BS, ASA, B5-9 type A spindles.
    3. High speed and light weight type strong fin...
3-jaw Ball Swing Lock Chuck
  • Model No:
    BL
  • Product Description:
    *The chuck can attract the workpiece and hold it on.
    *The jaw operates in two stages :
    Clamping pull back, so it can hold the workpiece exactly on the position in front of the chuck, and make it under the stabile situation.
    The chuck can grasp the...
3-Jaw Draw Down Power Chuck
  • Model No:
    DR
  • Product Description:
    Draw down power chuck feature of radial clamping will lead to almost no work piece uplifting displacement; for machining casting and forging part:
    1. For the clampped work-piece is appressed to the surtace, chucks are suitable for heavy machining.
    ...
3-jaw Extra High Speed Through-hole Power Chuck
  • Model No:
    HN
  • Product Description:
    1.Possible 10,000 r.p.m. highest speed chuck.
    2.Model HN chucks are assembled with adaptor for ASA B5.9 type A spindles.
    3.Model HN chucks are manufactured form high grade alloy steel. All sliding surfaces are hardened and ground for accurate actua...
Boring Mill Jaws
  • Model No:
    HB4
  • Product Description:
    1. Clamping of workpiece for larger size lathe, vertical lathe, die set with jig.
    2. One set of 4-piece with T-bolt.
Non Through-Hole Rotary Hydraulic Cylinders
  • Model No:
    MS-C SERIES
  • Product Description:
    Non through hole rotary hydraulic cylinder (with valves and switches).
    1. Built-in safty check valves.
    2. Pressure relief valves and sensor switches.
Non Through-Hole Rotary Hydraulic Cylinders
  • Model No:
    MH SERIES
  • Product Description:
    1. Compact, low inertla, light weight cylinder :
    Manufuctured by aluminium alloy, this cylinder is light weight design to reduce the loading of spindle.
    2. High speed :
    This balanced design cylinder is light weight, compact and maintains outstandi...
4 Jaw Wedge Type Through Hole Power Chucks (Without Adaptors)
  • Model No:
    NIT-200
  • Product Description:
    1. All sliding surfaces are hardoned and ground for accurate running andlong service repeatability. Lubrication nipple in each master jaw.
    2. Base jaw: 1.5mm X 60° serrtion.
    3. Mounting: adaptor mounting to fit DIN, ISO, BS, ASA B5.9 type A spindl...
3 Jaw Wedge Type Extra Large Through Hole Power Chucks (With Adaptors)
  • Model No:
    NB-200A
  • Product Description:
    1. More large bore: having the largest bore in wede type power operated chucks.
    2. 20% large bore: approximately 20% higher speed, higher gripping force and larger bore compared with usual chucks.
    3. Model N-200A chucks are assembled with adaptor ...
4 Jaw Strong Scroll Chucks (Plain Back & 2 Piece Jaws)
  • Model No:
    SIK SERIES
  • Product Description:
    SIK SERIES 4-jaw strong scroll chuck plain back, 2-piece jaws (front and back mounted):
    1. Hard jaws are adopted for square for square or octagonal thin tube workpieces machining.
    2. Sofe jaws could grip rectangular workpiece after being unisotrop...
4 Jaw Scroll Chucks (Plain Back & Solid Jaws)
  • Model No:
    SIC SERIES
  • Product Description:
    1. Gripping of square or octagonal workpieces could fit into central line automatically.
    2. SIC have high stability in gripping thin tube work piece.
    3. The specification is the same as SC type.
    4. The body is made of MEEHANITE. It is suitabl...
Soft Jaws For Hydraulic Power Chucks
  • Model No:
    HC SERIES
  • Product Description:
    1. Soft jaw for hydraulic chuck.
    2. Soft jaw for CNC lathe.
6 Jaw Scroll Chucks (Plain Back)
  • Model No:
    SE SERIES
  • Product Description:
    1. SE types are specially suit for drilling, endmilling, tapping or grinding in tool grinders.
    2. Hung bore diameter design for wider application of bar workpieces.
    3. SE type feature gripping for thin tube and high roundness accuracy.
    4. The bo...