657514188

Yomura Technologies Inc.

In Mold Decoration (IMD) and 2 Color Shot in Jection.

Products

INSERT INJECTION MOLD

INSERT-INJECTION-MOLD

  • Model No: N/A
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

Insert Molding Technology:

When a metal, plastic or ceramic part needs to be embedded in plastic to improve product structure it is called Insert Molding. It is a widely used process and one that YOMURA TECHNOLOGIES specializes in.

With Insert Molding, a part is placed in a mold cavity then a selected plastic material is injected directly over it resulting is a single part with the insert(s) encapsulated by the material. This process normally uses engineering plastics for improved wear resistance, tensile strength and weight reduction.

Insert Molding can be a highly efficient alternative to the assembly of discrete parts using soldering, connectors, fasteners, or adhesives. It also expands plastic capabilities and can reduce final product cost by limiting the amount of costly metal needed to create a part. And importantly, because we can use conventional single shot injection machines for Insert Molding, tooling costs are lower than with a multi-shot processing.

Benefits:

-Reduced assembly and labor costs
Because insert molding joins numerous components with thermoplastic, assembly and labor costs are greatly minimized. For example, a single stamping can be overmolded, then perforated to create multiple circuit paths.

-Reduced size and weight
By eliminating fasteners and connectors, and by combining the physical strength of resin and metal inserts, insert molding yields smaller and lighter components.

-Increased reliability
With every part tightly secured in thermoplastic, an insert molded component prevents part loosening, misalignment, improper terminations, and other problems. The thermoplastic resin also provides improved resistance to shock and vibration.

-Increased design flexibility
Designers appreciate the virtually unlimited configurations that insert molding allows. For example, in creating a 3D circuit board, overmolding permits circuitry to move freely through the part, from inside to outside, up walls, down in holes-and the plastic ties it all together.

Specification :

Materials:

Engineering plastic or Thermo Plastic Rubber (TPR) inserted with metal frame die casting, plated copper pin, sockets, wire frames, etc.

Applications:

  • TPR + Metal Frame(3C Mechanical Parts)
  • ABS + Al. Die Cast (Sports/ Medical)
  • Eng. Plastic + Patting Pin/Eng. Plastic + Wireframe (Connector)
  • Eng. Plastic + Copper Pin/Contact (Precision Electronic Component)

Yomura Technologies Inc.

  • Taiwan
  • No 2-3, Kung 8th Rd., 2nd Industrial Park, Lin kou, New Taipei City 244, Taiwan
  • 886-2-86013839
  • 886-2-86013833
  • 657514188