Description :

Prevailing torque bearing nut adds the special tightly-locking ring of spring steel according to the engineering principles. When used, the ring of spring steel clip and presses into the solt. It's effects of shockproof and prevention of loosening are 100%, and it would not affect the thread of the screw and the tightly-locking ring of spring steel after friction again and again. In the variation of temperature from -30¢Xc to +300¢Xc and erosion of all kinds of oli(such as gasoline. petroleum. alcohol. etc), its tightly-locking ability is not affected at all.

Specification :

 

 

Part No	Thrcad*pitch	H/mm	h/mm	D/mm	D2/mm	t/mm	S/mm	No.of grooves for hook	Kg
GUK10	M10*0.75	7.4	4.5	18	15	15	3	4	0.009
GUK12	M12*1.0	7.4	4.5	21	18	18	3	4	0.009
GUK15	M15*1.0	8.4	5.5	24	21	21	4	4	0.012
GUK17	M17*1.0	8.4	5.5	28	24	24	4	4	0.018
GUK20	M20*1.0	9.4	6.5	32	27	27	4	4	0.025
GUK25	M25*1.5	10.3	6.5	38	33	33	5	4	0.035
GUK30	M30*1.5	10.9	6.5	44	38	38	5	4	0.046
GUK35	M35*1.5	11.1	7.0	50	44	44	5	4	0.062
GUK40	M40*1.5	12.1	8.2	56	50	50	6	4	0.080
GUK45	M45*1.5	12.1	8.2	62	55	55	6	4	0.095
GUK50	M50*1.5	12.7	8.5	68	61	61	6	4	0.130
GUK55	M55*2.0	13.2	8.5	75	68	68	7	6	0.160
GUK60	M60*2.0	13.2	8.5	80	73	73	7	6	0.170
GUK65	M65*2.0	14.3	9.5	85	77	77	7	6	0.185
GUK70	M70*2.0	14.3	9.5	92	84	84	8	6	0.23
GUK75	M75*2.0	15.3	10.5	98	89	89	8	6	0.27
GUK80	M80*2.0	16.3	11.5	105	96	96	8	8	0.34
GUK85	M85*2.0	17.3	12.5	110	100	100	8	8	0.39
GUK90	M90*2.0	17.5	12.5	120	110	110	10	8	0.54
GUK95	M95*2.0	18.5	13.5	125	115	115	10	8	0.6
GUK100	M100*2.0	19.5	14.5	130	120	120	10	8	0.68

• Unnecessary to add any tooth lock washer.
• Unnecessary to mill a keyway on the shaft and shorten its assembled time.
• Allow to be used after repeatedly screwing.
• Bearing any vibration and ensuring the integrated resistance when not tightened.
• The surface is galvanized to prevent rust.
• Standards: M10-M100.
• Material: SS41
• Nylon material: PA6

Features :

NO.AN00 - AN40 available for 304 stainless steel.