An Chen Fa Machinery Co., Ltd.

Taiwan Manufacturers, Exporters.

Products

Nail Maker

nail-making-machine

  • Model No: YT-1 , YT-2 , YT-3 , YT-4 ,YT- 8
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

The machine is fed with from the wire stand through 2 sets of rollers, vertical and horizontal, which straighten the wire, and another set of rollers which pushes it into the right position for the head to be formed.The grip dies then close and hold the wire very tightly while the punch, attached to a punch box driven back and forth by connecting rods from the crank shaft, hits the wire end to form a nail head.The punch then moves backward, the grip dies open, the wire moves forward to a desired length, and two opposing cutters cut off and point the nail. The finished nail is ejected through the chute to a container on the ground. The cycle is continuous.

Specification :

ModelSize of NailR.P.M.Limit Motor HPOutput 8hr/set (kgs)
YT-1BWG # 17X3/4"(19mm)
BWG # 16X1"(25mm)
550160
100
YT-2BWG # 15X 1 1/4"(32mm)
BWG # 14X1 1/2"(30mm)
BWG # 13X1 3/4"(45mm)
4502150
210
340
YT-3BWG # 12X2"(50mm)
BWG # 11X2 1/2"(55mm)
BWG # 10X3"(75mm)
3503990
530
810
YT-4BWG # 9X 3 1/2"(90mm)
BWG # 8X4"(100mm)
2705900
1270
YT-8BWG # 7X5"(127mm)
BWG # 6X6"(152mm)
BWG # 5X7"(178mm)
1807 1/21080
1800
2240

An Chen Fa Machinery Co., Ltd.

  • Taiwan
  • No. 920, Pei Kang Road, Chiayi City 600, Taiwan
  • 886-5-2371127
  • 886-5-2377088