S-B34S automatic Gang Slitter for strip cutting. The S-B34S cutter shaft equipped with tapper roller bearings on each end, ensure strips with maximize accuracy for stamping press. Mechanical clamping hubs are also equipped. Easy cutter hub change without cutter shaft dismantle.
|Capacity Per Minute||Up to 36 SPM|
|Tinplate Size||500 x 600 - 1145 x 1145 mm|
|Compressed Air Required||3kg/cm2x 20L/Min.|
|Horse Power Required||3HP|
|Floor Space Overall Height||2765L x 1800W x 1150H mm|
|Net Weight||1200 kgs|
*With clamping hub and carbide cutter, easy for size changeover and running accuracy.
*Double feeding dogs and push fingers design for squareness adjusting.
*Removable shafts bearing hub easy for cutters to remove or add.
*With splite draw ring, easy to add or remove.
*Variable speed control to match the can body production requirement.
*Cutter material is tungsten carbide.
*Cutter hub is tightly held on shaft by modern mechanical clamping system.
*Diameter of main cutter shaft is 110 mm.
*With two double sheet detectors to guarantee safe operation.