Shin I Machinery Works Co., Ltd.

Tin Can Making, Food Canning Machine and Twist-off Cap Making Machinery

Products

Automatic Can Body Drawing Machine

Automatic-Can-Body-Drawing-Machine

  • Model No: S-B18GL
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

S-B18GL Automatic Can Body Drawing Machine is built for two piece can drawing Piled strips are lifted by a pair of hydraulic cylinders then suck pads send strip one by one to strip feeding station. (also can link with Automatic Strip Feeder S-B18-2). Reciprocating feeding bar at feeding station push strip into punch tooling. Formed can body or end is ejected out via. air blowing to rear while strip scrap is ejected out by a pressing roller to side. Equipped with twin sets of punch tooling. Punch tooling is made of alloy steel or tungsten carbide ; besides, air cushion system is incorporated. Hence, sturdy for long life. An automatic lubrication pump and multiple safety devices are equipped for easy maintenance and safe operation.

Specification :

Machine TypeS-B18GL
Range of Can Dia.Round 55 - 86mm (For Double Die Setting)
Maximun Can Height56mm
Range of Strip Length550 - 1050mm
Range of Strip Width200 - 300mm
Cans Per Strip8 - 16 Cans
Stroke Per Min.80 - 100
Length of Stroke200 mm
Maximun Die Height420 mm
Maximun Ram Adjustment60 mm
Ram Bottom Area460 x 360 mm
Bolster Area770 x 480 mm
Horse Power RequiredMain Motor20HP
Hydraulic Pump2HP
Vacuum Pump1/2HP
Scrap Ejector1/4HP
Air Compressor10HP
Floor Space Overall Height3805L x 2566W x 2833H mm
Net Weight (approx.)11500 kgs

S-B18G

Features :

*Air clutch is adopted to ensure effective transmission.
*Basic double die design for save of tinplate material.
*Air cylinders are adopted for buffering the movement of big ram, hence precise stamp can be achieved.
*Cylinders are used for top & bottom die cushion to ensure a very smooth drawing of can bodies.
*Centralized lubrication system ensure the smooth running of the machine.
*Double sheet detectors are used to protect the damage of machine & dies.
*Can be connected with automatic strip feeder model S-B18-2 or S-B18-3 to save labor cost and connected with rotary trimmer model S-B61 to trim can flange.
*Equipped with double drawing - reverse - drawing dies.
*2 pices DRD can also can be formed by two separate drawing procedure.
*Double sheet detector is equipped for safe strip feeding.

Shin I Machinery Works Co., Ltd.

  • Taiwan
  • No. 43, Chung Cheng St., Chingshui Dist., Taichung City 436, Taiwan
  • 886-4-26238181
  • 886-4-26232129