Shin I Machinery Works Co., Ltd.

Tin Can Making, Food Canning Machine and Twist-off Cap Making Machinery

Products

Automatic F.O.E. Repair-Drying Machine

Automatic-FOE-Repair-Drying-Machine

  • Model No: S-B10RP
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

S-B10RP Automatic F.O.E Repair- Drying Machine is specially designed for small tin round full open end. Curled end is separated by a pair of separating knives at end magazine ; then feeding bars send it to spraying station. End is lifted up by a turning chuck. A NORDSON spraying gun undertake the spraying task to evenly spray lacquer along the end scoring line to avoid rust. Whole surface spray or opposite end side spray can be done. Sprayed ends are transferred by a turret to enter drying oven. Inside the drying oven , heating air is created and recycled by an electric heater and a blower. Ends are carried up through eight transfer screws and are ejected out through a magnetic belt and cooled down by air blowing. With recycleable lubricating system and multiple safety devices, easy for maintenance and can size changeover.

Specification :

S-B10RP

Machine TypeS-B10RP
Range of Can Dia.200 - 404D
Capacity Per Min.200 - 301D Up to 250 pcs/min.
307 - 401D Up to 250 pcs/min.
Horse Power Required and HeaterMain Motor3HP x 1
End Discharge Motor1/4HP x 1
Blower1/2HP x 2 , 2HP x 1
Heater15KW
Compressed Air Required5kg/cm2x 50L/Min.
Floor Space Overall Height2400 x 1500 x 2800 mm
Net Weight2400 kgs

Features :

* With NORDSON airless spray system for lacquar coating, easy to adjust the film volumn.
* Drying Oven is vertical design, hence save space.
* Safety devices provided to ensure M/C running safely.
* Auto temperature controller enable to adjust the best curing temperature.
* For Food full open end scoring line lacquer reparing to avoid rust.
* Drying oven equipped with electric (resistance) heating system.
* Can be used to repair inner side or outer side of full open end.
* Ends are lifted by eight screw posts in drying oven and carryout by a magnet conveyor.
* With special end swing stopper on magazine, stacked ends never touch slide bar to avoid scratch. System for variable lower chuck speed control by an inverter is equipped.
* Smoke discharge system to outdoor is to be built by buyer.

Shin I Machinery Works Co., Ltd.

  • Taiwan
  • No. 43, Chung Cheng St., Chingshui Dist., Taichung City 436, Taiwan
  • 886-4-26238181
  • 886-4-26232129