1. XE-XL & XLY type machines are suitable for the production of small & medium components shafts, mandrels.
2. Servomotor and Ball screw are used for the feed mechanism to insure smooth and convenient for feed rate adjust.
3. Hardened and ground main slide ways to hardness HRC 60. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.
4. Suspending type operate panel and MPG (Hand wheel) for easier setting and operation.
5. Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
6. Chip box/work piece clamping device of XLY type with driven motor and hydraulic tailstock.
7. XLY type could be designed and equipped with auto-loading & unloading device.
8. The machine could be designed to 1~4 spindles and controlled by Fanuc or Mitsubishi CNC controller for special purpose.
9. CE mark is available for special required.
1. Hole dia: Ø3~Ø 12 mm, Ø10~Ø 25 mm (Option).
2. Max. depth (Z): 1000 mm
3. No. of spindle: 1~4 spindles.
4. Spindle motor: 3~5 HP (with inverter).
5. Drill spindle feed (Z): servomotor 850~1300W / 5.39~8.34 N.M.
6. High pressure motor: 3~7.5 HP.
7. Max. spindle speed: 6000 rpm.
8. Drill Speed: 10~ 150 mm / min.
9. Rapid: 5000 mm / min.
10. Spindle infeed(Z): Ø40 x P10 x C3. 1
1. Pump output: 40~150 liter / min.
12. Max. pressure: 100~150 kg / cm².
13. Coolant tank: 800~1600 liter.
14. Floor space: 3000 x 4300 mm.
15. Net weight: 2600 kg.