• The Column type Deep hole drilling machine with CNC control are designed for drilling waterlines, Ejector pin holes of large type injection molds.
• Spindle is supported by angular contact bearings well-lubricated to all running points in the head.
• The rigid honeycomb walled column gives a stable cutting condition. FC-32 castings have been stress relived and annealed.
• Hardened and ground double V-ways for worktable X-axis main slide to hardness HRC 60. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.
• A huge wide and long worktable allows heavy work pieces. And extra wide saddle gives much heavier loading capacity.
• Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
• Spindle feed Z-axis and A-axis, feature P-grade linear motion guide way and provides stable cutting capacity.
• CNC could be selected with Fanuc or Mitsubishi brands.
• CE mark are available for special required.
|Specification||Model No.||XT-1500 CNC|
|Drill Capacity||Hole Dia||Ø3~Ø25 mm|
|Max. Depth (Z)||1500 mm|
|Worktable Horizontal (X)||3.3KW|
|Drill Spindle Vertical (Y)||3.3KW|
|Drill Spindle Feed (Z)||2.1KW|
|High Pressure Motor||7.5KW|
|Speed||Max. Spindle Speed||rpm|
|Worktable||Max. Loading Capacity||7000 kgs|
|Table Size||1800 x 1200 mm|
|Stroke of Worktable Horizontal (X)||1500 mm|
|Stroke of Spindle Vertical (Y)||900 mm|
|High Pressure Pump||Pump Output||54~90 Liter/min|
|Max. Pressure||105 kgs/cm²|
|Coolant tank||1200 Liter|
|Controlled Axes||X,Y,Z- 3 axes|
|Min. Setting Unit||0.001 mm|
|Floor Space||6000 x 4700 mm|
|Net Weight||20000 kgs|
|Standard Accessories||1. High pressure coolant pump|
|2. Automatic lubricator|
|3. Tool box with tools|
|Optional Accessories||1. Magnetic separator + Paper filter unit|
|2. Chip conveyor|
|3. Coolant cooler|
|4. Gundrill grinder|
|5. Special clamping fixture for special purpose|
|6. Semi-enclosed splash guard|