• Machines utilizing the BTA Deep Hole Drilling System for solid deep hole boring 30 – 200mm in diameter
• Drilling depths up to 5000mm
• Coolant filtration to 30 microns
• The rigid honeycomb walled Bed gives a stable cutting condition. FC-32 castings have been stress relived and annealed.
• Hardened and ground ways to hardness HRC 60. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.
• Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
• All box way design provides rigidity for heavy cutting.
• Type WR is the workpiece rotation. TR is the drilling head rotation, workpiece fixed on the fixture.
• CE mark are available for special required
|Power||50 kw with Inverter|
|Ball screw for feeds Z-Axis||Ø80 x P10 x C5|
|Swing over bed||770 mm|
|Controller||FANUC 0i Mate-TC|
|High pressure pump||750 Liter/ min|
|Standard accessories||1. High pressure coolant pump|
|2. Automatic lubricator|
|3. Boring Head and drill tube|
|4. Guide bush for deep hole drilling|
|5. Support bush for drill tube|
|6. Tool box with tools|
|Optional accessories||1. Magnetic separator + Paper filter unit|
|2. Chip conveyor|
|3. Coolant cooler|
|4. Pressure Head|
|5. Spare guide bush for deep hole drilling|
|6. spare drill tube and supporting bush|
|7. CE Certificate|