1. High-current bridge rectifier in glass passivated or silicon type.
2. Measured at 1.0mhz and applied reverse voltage of 4.0vdc.
T3.hermal resistance from junction to ambient mounted on pcb with 0.5 x 0.5-inch (13 x 13mm) copper pads.
1. Polarity: as marked on body. 2. Weight: 0.02 ounces, 0.38 grams. 3. Mounting position: any. 4. Maximum rating and electrical properties. 5. Maximum recurrent peak reverse voltage (vrrm): 50 to 1000v. 6. Maximum rms voltage (vrms): 35 to 700v. 7. Maximum dc blocking voltage (vdc): 50 to 1000v. 8. Maximum average forward rectified current at ta: 40 degrees celsius i(av): 1.0a. 9. Peak forward surge current: 8.3ms single half sine-wave super imposed on rated load (jedec method) (ifsm): 50a. 10. Maximum forward voltage at 1.0a (vf): 1.1vdc. 11. Maximum dc reverse current at tj: 25 degrees celsius at rated dc blocking voltage at tj: 125 degrees celsius (ir): 10 / 500ua. 12. I2t rating for fusing (t: < 8.3ms): 10.4a2s. 13. Typical junction capacitance per element (note 1) (cj): 25pf. 14. Typical thermal resistance (note 2) (rja): 40 degrees celsius / w. 15. Operating temperature range (tj): -55 to +150 degrees Celsius. 16. Storage temperature range (tstg): -55 to +150 degrees Celsius.