10/100/1000M TP to 1000SX/LX/ZX Fiber Managed Converter. AM2201/2202 is designed to make conversion between 10/100/1000 Base-TX and 1000Base-SX/LX Fast Ethernet. With SNMP agent, web-based management and Telnet text-based manual driven management, the network administrator can logon the remotely converter to monitor, configure and control the activity of each port. In addition, both converters will be shut down if the cooling system fails and the temperature is too high.
Key features: 1. Supports one 10/100/1000Base-T Gigabit Ethernet UTP port and one 1000Base-SX/LX Gigabit Ethernet Fiber port. 2. Supports comprehensive types of fiber with different distances and connections, including SC/Bidi-SC/LC/VF-45 and so on. 3. Supports auto shutdown when temperature reaches too high and the cooling system fails. 4. Supports external loop back capability. 5. Supports 802.3x flow control for full-duplex ports and backpressure for half-duplex ports. 6. Supports broadcast suppression. 7. Supports lower network system broadcast storm. 8. Programmable max. Ethernet frame length of range from 1522 to 1536 bytes. 9. Supports spanning tree (802.1D) and RSTP (802.1w). 10. Supports denial forwarding MAC address and allowed forwarding MAC address. 11. Supports web-based and text-based management user interface. 12. Supports SMTP, MIB, SNMP enabled/disabled and RMON with group 1,2,3,9. 13. Supports up to 4 trap hosts, TFTP for upgrade and DHCP client. 14. Supports power off line to send trap alarm and auto-shutdown system with battery (optional). 15. Supports E-mail client (SMTP RFC 821) and mobile phone short message (SMS) up to six staff for sending traps and alarm message.