1394 6 pin SMT type material:
1. Housing: thermoplastic, class fiber filled UL94V-0 (see table1).
2. Contacts: phosphor vronae (T=0.25mm).
3. Shell: brass (T=0.30mm).
4. Finish
(1) Contacts: gold plating (see table2) in contact area, 100 u" min tin plating on solder tails. 50u" min nickel under plating over all.
(2) Shell: 80 ~ 100u" min. nickel plating. 50u" min. Cu under plating over all.
Electrical characteristic:
1. Contact resistance: termininal 30 milliohms.
2. Insulation resistance: 1000 mega ohms min.
3. Dielectric voltage: 500V AC one sec level.
4. Operating temperature: -55°C ~ +105°C.