JIH-I Machinery Co., Ltd.

Taiwan Manufacturers, Exporters.


CNC Machining Centers

cnc machining center

  • Model No: JIH - CNC 6500 M TYPE
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

1. Machine features:
(1) Choice of working lengths: 3.5,4.5,5.5 and 6.5 meters.
(2) It is avaiable for each aluminum meterial of short - scale multipe processing & long - scale processing.
(3) Traveling column features high positioning accuracy.
(4) The column longitudinal traverse is driven through servomotor combined with gear/ rack transmission.
(5) Three axes travels and driven by servomotors.
(6) High precision linear guide ways on three axes assure fast and smooth movements.
(7) 12-tool magazine is standards equipment.
(8) Air clamps for workpieces.(vise are option)
(9) Emergency hold wire is provided at the front of machine for safety protection for the operator and the machine.
(10) Movable chips are equipped at the bottom of the machine. providing convenient chip handling.
2. Standard accessories.
(1) Syntec CNC controller.
(2) Oil mist cooling.
(3) Safety guard for cutter(BT40)(BT30 without this device).
(4) Auto lube system.
(5) Spindle air blast.
(6) Tool kit.
(7) Telescopic covers for X.Y.Z.axis.
(8) Emergency hold wire.
(9) Alarm light.

Specification :

1. Model: JIH-CNC 6500(BT40). (1) Travel: a. X-axis travel: 6,500mm. (opt.3,500mm, 4,500mm, 5,500mm). b. Y-axis travel: 350mm. c. Z-axis travel: 350mm. d. Spindle center to table surface: mini 150mm, Max 550mm. (2) Table: a. Table working type: 3 sets T-slots. b. Table working surface: 470x6,500mm. c. Max. loading capacity: 500kg. d. T-Slots. (No.xWxP): 3x50x215 mm. (3) Spindle: a. Spindle speed: 8,000R.P.M. b. Spindle motor: 7.5kw(10HP). c. Spindle taper: BT40. (4) Feedrate: a. Rapid traverse(X/Y/Z): X:40 m/min, Y:22 m/min, Z:22 m/min. b. 3-Axes servomotors: X-Axis:2kw、Y-Axis:1.0kw, Z-Axis:1.0kw(Mitsubishi). c. Positioning accuracy: -. d. Cutting-feed rate: F:1~5,000mm/min. 2. Model: JIH-CNC 6500(BT30). (1) Travel: a. X-axis travel: 6,500mm (opt.3,500mm, 4,500mm, 5,500mm). b. Y-axis travel: 300mm. c. Z-axis travel: 300mm. d. Spindle center to table surface: 150~450mm. (2) Table: a. Table working type: vise 3(1 set/per meter). b. Table working surface: 300x6,500mm. c. Max. loading capacity: 300kg. (3) Spindle: a. Spindle speed: 10,000R.P.M. b. Spindle motor: 3.75kw(5HP), opt.5.5kw. c. Spindle taper: BT30. (4) Feedrate: a. Rapid traverse(X/Y/Z): X:50 m/min、Y:24 m/min, Z:24m/min. b. 3-Axes servomotors: X-Axis: 2kw, Y-Axis:1.0kw, Z-Axis: 1.0kw(Mitsubishi). c. Cutting-feed rate: F:1~5,000mm/min. 3. Please refer to the attached file for detail information and spec.

JIH-I Machinery Co., Ltd.

  • Taiwan