Taiwan Manufacturers, Exporters.

Products

LED Tact Switches

led tact switches

  • Model No: TSE2-01PA
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

1. Small dimensions (6.0x6.0).
2. Mechanical life: min. 1 x 10 cycles.
3. Good feeling.

Specification :

1. Contact rating: 50 mA @ 12VDC. 2. Electrical life: 1,000,000 cycles. 3. Mechanical life: 1,000,000 cycles min. 4. Position travel: 0.25±0.1. 5. Insulation resistance: > 100MΩ DC250V. 6. Withstand voltage: AC250V 1 minute. 7. Contact resistance: < 100mΩ. 8. Ambient temper.: -25℃ to70℃. 9. Operating force: 80±20 gf;120±30 gf; 180±50 gf. 10. Soldering process: hand soldering: use a soldering iron of 30 watts,controlled at 380℃ approximately 3 seconds while applying solder. 11. Wave soldering: when applying wave soldering, the peak temperature of the wave Oven should be set to 260℃max. Condition for soldering (wave & Non-washable type). 12. Reflow soldering: When applying reflow soldering, the peak temperature of the reflow Oven should be set to 250℃max. Condition for soldering (reflow & Non-washable type).