* Suitable for large workpiece machining.
* Ø345mm very large through hole and table diameter.
* Ø530mm is particularly good for pipeline machining.
* Excellent for heavy loading and high accuracy.
* Rigid structure design and hydraulic clamping system.
* Compact design.
Table diameter (mm)
|Diameter of "Pilot" bore (mm)||Ø400H7|
|Diameter of through hole (mm)||Ø345|
|Table height at 0° (mm)||250|
|Table Center height at 90° tilted (mm)||310|
|Width of T slots (mm)||18H7|
|Width of alignment key in mounting base (mm)||18H7|
|Clamp operation pressure (Hydraulic) (kg/cm2)||35 bar|
|Ambient temperature (°C)||18°~40°|
|Minimum input increment (degree)||0.001°|
|Gear ratio, Motor to Table Top||1/180|
|Indexing accuracy (sec of arc)||15"|
|Repeatability (sec of arc)||4"|
|Net Weight (kg)||450|