Yung Chane Shuen Enterprise Co., Ltd.

Taiwan Manufacturers, Exporters.

Products

CNC Waterjet Cutting System

CNC-Waterjet-Cutting-System

  • Model No: WT-1313/WT-2513/WT-3119
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

* TYPICAL APPLICATIONS OF WATERJET CUTTING SYSTEM:
The waterjet cutting system is suited for cutting a wide variety of materials. Waterjet cutting creates no thermal effect, strain, tearing or choking problems. Two cutting systems are usually applied as shown in the examples below.
A: WATERJET CUTTING
Simply apply a high pressure water stream for cutting corrugated boxboard, meats and foods, foam, cloth, etc.
B: HYDROABRASIVE CUTTING
Employs a high pressure water stream with an abrasive for cutting Titanium alloys, glass, leather, composite material, glass fiber, stainless steel, granite, engineering plastics, ceramics, and printed circuit boards.

* OPTIONAL EQUIPMENT:
1. Z-axis servo drive.
2. Two table configuration eliminates the downtime of parts changing and permits the machining of different parts simultaneously.
3. Increasing cutting slide to 6 sets. Distance between spindles can be adjusted separately. (Cutting head not included)
4. Vacuum suction system for parts loading and unloading, and automatic part clamping.
5. Intensifier pump motor increased to 50HP or 100HP

Specification :

ModelWT-1313WT-2513WT-3119
Table size1220 x 1220 mm2440 x 1220 mm3050 x 1830 mm
StrokeX axis1300 mm2500 mm3100 mm
Y axis1300 mm1300 mm1900 mm
Z axis200 mm200 mm200 mm
Max. traverse speed (Rapid move)XY-24M/Min, Z-8M/Min.
Water jet systemMax. working pressure55000 PSI55000 PSI55000 PSI
Flow rate0.5-2.0 GPM0.5-2.0 GPM0.5-2.0 GPM
No. of intensifiers1 or 2 sets1 or 2 sets1 or 2 sets
AccuracyPositioning+0.1mm+0.1mm+0.1mm
Repeatability+0.05mm+0.05mm+0.05mm
HorsepowerHigh pressure pump25/30/50/75/100 HP25/30/50/75/100 HP25/30/50/75/100 HP
Y-axis4 HP4 HP4 HP
Air pressureMin. 6kg/cmMin. 6kg/cmMin. 6kg/cm
CNC controllerNUM 1020NUM 1020NUM 1020
LubricationFully automaticFully automaticFully automatic

Illustration of basic elements of the waterjet system.


Cutting corrugated boxboard

Cutting meats and foods
 

Cutting granite

Cutting glass

Cutting leather

Cutting printed circuit board

Cutting Titanium alloy

Cutting metal

Yung Chane Shuen Enterprise Co., Ltd.

  • Taiwan