Expandable Polystyrene (EPS)
- Model No:
GENERAL PURPOSE
- Product Description:
1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioni...
Expandable Polystyrene (EPS)
- Model No:
LOW PENTANE
- Product Description:
1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 20 kg/m³.
2. Conditioni...
Expandable Polystyrene (EPS)
- Model No:
GENERAL PURPOSE
- Product Description:
1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioni...
Expandable Polystyrene (EPS)
- Model No:
FAST CYCLE-211
- Product Description:
1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioni...
Expandable Polystyrene (EPS)
- Model No:
SELF-EXTINGUISHING
- Product Description:
Self-extinguishing (Flame-retardant) UL94:
1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we wan...
Expandable Polystyrene (EPS)
- Model No:
SELF-EXTINGUISHING
- Product Description:
Self-extinguishing (Flame-retardant) UL94:
1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we wan...
Expandable Polystyrene (EPS)
- Model No:
GENERAL PURPOSE
- Product Description:
1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioni...
Expandable Polystyrene (EPS)
- Model No:
GENERAL PURPOSE
- Product Description:
1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioni...
