Far East Machinery Co. Ltd.

Taiwan Manufacturers, Exporters.

Products

CNC Horizontal Wheel Turning Lathes

cnc horizontal wheel turning lathes

  • Model No: WHL-F50
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

1. Description: cost effective wheel turning machine twin turrets for faster aluminum wheel turning.
2. Features: ergonomics Design:The existing four-axis aluminum wheel turning machine on the market sets the lower turret on the right-button side of the machine causing the inconvenience for the operator to close to the spindle and also hardly to load and unload the material. WHL-F50 advances above weakness. The left and right auto door can move simultaneously, facilitating whole operations.
Both sides auto door simultaneous movement can improve the operating space and raise the convenience for the operator to load and unload the materials.
3. The height between spindle center and foot pedal is 900 mm. Operator can easily load and unload the wheel to reduce the extra burden.
4. Max. turning diameter: ø600 mm.
5. Max. turning length: 725 mm.
6. X-Axis rapid traverse rate: 16 m/min.
7. X-Axis Max. travel (upper): 295 mm.
8. X-Axis Max. travel (lower): 180 mm.
9. Z-Axis rapid traverse rate: 20 m/min.
10. Z-Axis Max. travel (upper): 700 mm.
11. Z-Axis Max. travel (lower): 550 mm.

Specification :

1. Capacity: (1) Max. turning diameter: ø600 mm. (2) Max. swing over bed ø725 mm. 2. Spindle: (1) Spindle dia. at front bearing ø130 mm. (2)Spindle speed 2500 rpm. (3)Spindle motor (continuously / 30min), 37 / 45 kW. (4) Spindle nose A2-8. 3. Turret: (1) Number of tools 10(Upper) / 6 (lower). (2) Tool size OD / ID, 25 / 50 mm. 4. X-axis: (1) Travel 295 (Upper) / 180(lower). (2) Rapid traverse rate 16 m/min. (3) AC servo motor 4.0 kW. (4) Ballscrew ø36 x P8. 5. Z-axis: (1) Travel 700 (upper) / 550 (lower). (2) Rapid traverse rate 20 m/min. (3) AC servo motor 4.0 kW. (4) Ballscrew ø50 x P10. 6. Coolant unit: (1) Pump for this ooling 1.27 kW. (2) Pump for chips cleaning 1.1 kW. (3) Container 1000 liters. 7. Hydraulic unit: (1) Pump 2.2 / 3, kW / HP. (2) Container 44 liters. 8. Lubrication unit: (1) Pump 25 W. (2) Container 4 liters. 9. Machine size: (1) Width 5200 mm. (2) Depth 2300 mm. (3) Height 2200 mm. (4) Weight (Approx.) 12000 kgs.

Far East Machinery Co. Ltd.

  • Taiwan