Didn't find what you want? Post a Buying Lead Now!
| Description : | A membrane switch consists of two polyester films screen printed with conductive ink to complete the circuit. A spacer in between two circuits, which is, die cut at contact points. The die-cut holes allow the touch of a finger to close the contact, completing the circuit. The circuit is broken when released. The panel posterior is laminated with an adhesive for mounting to a backer or enclosure and is terminated with a means for interfacing with the customer’s electronics. |
|---|---|
| Specification : | 1. Environmental: (1) Operating Temperature: -40°Cto+80°C (-40°to176°F) (2) Storage Temperature: -40°Cto+85°C (-40°to185°F) 2. Humidity: 40°C, 90% to 95% for 240 hours. 3. Vibration: 20 G’smax. 4. Mechanical: (1) Actuation force: non-tactile 60g to 300g (2 oz to 10oz) / tactile 150g to 400g (6 oz to 14oz). 5. Switch stroke: Life expectancy: (1) Non-tactile 0.1 to 0.5mm. (2) Tactile 0.6 to 1.5mm. (3) Non-tactile > 5millionactuations. (4) Tactile > 1million actuations. 6. Electrical: (1) Operating voltage: 35volts maximum Operating current: 10 micro amps to 100 milliamps, resistive. (2) Operating power: 1 watt maximum. 7. Circuit resistance: 10ohms to 500ohms, dependent on size and layout. 8. Insulation resistance: 100Mohms at 100VDC. 9. Dielectric withstand: >250VRMs(50-60Hz1minute). 10. Contact bounce ≦ 5milliseconds. |
| Company Name: | Elcom Design Inc |
|---|---|
| Contact Person: | Mr. Luc Wang
|
| Address: | 8F., No. 48, Section 2, Kai-Feng Street, Taipei City 10841, Taiwan |
| Telephone: | 886-2-23701018 |
| Fax: | 886-2-23719563 |
| Web Site: | http://www.elcomdesign.com/ |
Home |
How to Buy |
How to Sell |
My BMS |
Help |
About Us |
Advertise |
Link Us |
Contact Us |
Site Map
