657212825

Stanch Stainless Steel Co., Ltd.

Manufacture of Stainless Steel Sheets and Coils.

Products

Stainless Steel PVD Sheet

stainless steel pvd sheets

  • Model No: N/A
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

PVD is the abbreviation of Physical Vapor Deposition. It’s a process to produce a metal vapor (Titanium, Chromium and Titanium Aluminum) that can be deposited on electrically conductive materials as a thin highly adhered pure metal or alloy coating. It’s a process carried out in a vacuum chamber at vacuum using a cathodic arc source.

PVD coating is one of the best methods for enhancing thin film plating elements. The vacuum deposition method coats the product with a film of hard refractory material 1-2 microns thick.

Stanch PVD coating in an innovation in the creation of colored stainless steel making the surface much harder and more durable than others. The coating deposition method coats the product with a film of hard refractory 1-2 microns thick, but we make it thicker for better wear, scratch and corrosion resistance.

Specification :

Our PVD coating was good on scratch resistant as well. As following test picture, we make a scratch on the surface of sheet by a tolling and observe under the microscope. The bonding of coating layer on C and J samples are not good. The coating chip was observed along the both sides of scratch. K sample is good but the chip still to be found along with the both sides of scotch. Stanch sample has the best bonding, no chip was found.

Grade

• Grade 304/304L (UNS S30400/S30403, EN 1.4301/1.4307) 
• Grade 316L (UNS S31603, EN 1.4404) 
• Grade 409L (UNS S40900, EN 1.4512) 
• Grade 430 (UNS S43000, EN 1.4016) 
• Grade 441 (UNS S44100, EN 1.4509)

Finish

• No.1/2D/2B/BA 
• Grinding Finish (No.3/No.4/No.5/No.6/SB/HL) 
• Mirror Finish 
• Vibration/CD Overlay/Bead Blast/Etched Finish/Embossed Finish

Type

Sheet Only

Color

Gold/Black/Brass/Rose/Champagne
We are continuously researching and developing the process to add more colors. If there is a particular color that you’re interested in developing, please don’t hesitate to contact us.

Thickness

0.3 – 3.0mm
The thickness over 3mm are acceptable upon the request

Sizes

Max. 1524 x 4000mm
Special dimensions are acceptable upon the request

PE Coating

Double PE or Laser PE coating

Stanch Stainless Steel Co., Ltd.

  • Taiwan
  • No. 51, Ching 1st Road, Wuchi District, Taichung City 43541, Taiwan
  • 886-4-26595179
  • 886-4-26595046
  • 657212825