Taiwan Manufacturers, Exporters.

All Products

Full Body Harness (Safety Protective Garment)
  • Model No:
    HS-4501
  • Product Description:
    Safety harness and lanyard are strongly recommend when working at height above 2M.
Four Way Three Position Valve (Spare Parts)
  • Model No:
    SMVT-43
  • Product Description:
    ◆Enter, return oil, double return way of action controlled.

    ◆Can control and operate alone.
3-Strunge Rolling Wheel (Cable Slipping Wheel Frame)
  • Model No:
    CRS-3600
  • Product Description:
    ◆Connecting part can freely to exchange the angle, and can do times to connection.

    ◆Rolling wheel with the double layer design. The hole diameter can be adjusted by the working requirement. The wire pulling direction can also be used even it is no...
Complex Hydraulic Busbar Tool (Benders Tool)
  • Model No:
    MPCB-401
  • Product Description:
    ◆Contains three functions: punching,flat bending, and cutting busbar.

    ◆Punching: punching precisely, fewer glitches, depth in 70mm.

    ◆The max. punching capacity - copper and aluminum: 020.5x10mm, iron: D20.5x8mm.

    ◆Flat bending: completes a 90...
Insulated End Terminal Pincer (Crimping Tool)
  • Model No:
    MH-125
  • Product Description:
    ◆Lightweight, easy to operate and carry spring type contraction safe effort.

    ◆Suitable for crimping bare terminal.
Separate Type Multiple Tool
  • Model No:
    CO-5250M
  • Product Description:
    ◆A single-loop crimping tool has lightweight, easy to carry and operate.

    ◆It is mainly made of high-carbon steel, which had hardness heat treatment that has high tension resistance, not easy deformation.

    ◆The multi-functional combination makes ...
Hydraulic Punching Tool
  • Model No:
    N/A
  • Product Description:
    Being a professional punching tool manufacturer with leading techology, Tai Cheng always does the best for considering and fulfilling that customers' needs and demands. A wide range of punching tools produced and provided by Tai Cheng is for meet...
Ratchet Type Of Punching Tool
  • Model No:
    N/A
  • Product Description:
    Being a professional punching tool manufacturer with leading techology, Tai Cheng always does the best for considering and fulfilling that customers' needs and demands. A wide range of punching tools produced and provided by Tai Cheng is for meet...
Angles-steel Hydraulic Punching Tool
  • Model No:
    N/A
  • Product Description:
    Being a professional punching tool manufacturer with leading techology, Tai Cheng always does the best for considering and fulfilling that customers' needs and demands. A wide range of punching tools produced and provided by Tai Cheng is for meet...
Double-Hole Type Of Hydraulic Punching Tool
  • Model No:
    CH-80
  • Product Description:
    Being a professional punching tool manufacturer with leading techology, Tai Cheng always does the best for considering and fulfilling that customers' needs and demands. A wide range of punching tools produced and provided by Tai Cheng is for meet...
Light Steel Hydraulic Punching Tool
  • Model No:
    CH-13
  • Product Description:
    Being a professional punching tool manufacturer with leading techology, Tai Cheng always does the best for considering and fulfilling that customers' needs and demands. A wide range of punching tools produced and provided by Tai Cheng is for meet...
Female Wire Processing Machine Of Punching Tool
  • Model No:
    N/A
  • Product Description:
    Being a professional punching tool manufacturer with leading techology, Tai Cheng always does the best for considering and fulfilling that customers' needs and demands. A wide range of punching tools produced and provided by Tai Cheng is for meet...
Cable, Steel Ropes Cutting Tool
  • Model No:
    CC-22
  • Product Description:
    Cable 102-5002, round bars 5mm Ø -9mm Ø, Steel ropes 9mm Ø -14mm Ø
    • Electric cables, aluminum wires for cutting, smooth blade, quickness; type: direct type, ratchet type.
    •Specialize in cutting steel ropes, round bars, its handle is designed to be...
Cable, Steel Ropes Cutting Tools
  • Model No:
    CC-38
  • Product Description:
    Cable 102-5002, round bars 5mm Ø -9mm Ø, Steel ropes 9mm Ø -14mm Ø
    • Electric cables, aluminum wires for cutting, smooth blade, quickness; type: direct type, ratchet type.
    •Specialize in cutting steel ropes, round bars, its handle is designed to be...
Cable, Steel Ropes Cutting Tools
  • Model No:
    CC-60
  • Product Description:
    Cable 102-5002, round bars 5mm Ø -9mm Ø, Steel ropes 9mm Ø -14mm Ø
    • Electric cables, aluminum wires for cutting, smooth blade, quickness; type: direct type, ratchet type.
    •Specialize in cutting steel ropes, round bars, its handle is designed to be...
Cable, Steel Ropes Cutting Tools
  • Model No:
    CC-100
  • Product Description:
    Cable 102-5002, round bars 5mm Ø -9mm Ø, Steel ropes 9mm Ø -14mm Ø
    • Electric cables, aluminum wires for cutting, smooth blade, quickness; type: direct type, ratchet type.
    •Specialize in cutting steel ropes, round bars, its handle is designed to be...
Cable, Steel Ropes Cutting Tools
  • Model No:
    CC-400
  • Product Description:
    Cable 102-5002, round bars 5mm Ø -9mm Ø, Steel ropes 9mm Ø -14mm Ø
    • Electric cables, aluminum wires for cutting, smooth blade, quickness; type: direct type, ratchet type.
    •Specialize in cutting steel ropes, round bars, its handle is designed to be...
Hydraulic Cutting Tools
  • Model No:
    CPC-20A
  • Product Description:
    To cut the telephone cables, steel ropes, round bars, aluminum.
    Hydraulic separate type of cutting tools.
Hydraulic Cutting Tools
  • Model No:
    CPC-40A
  • Product Description:
    To cut the telephone cables, steel ropes, round bars, aluminum.
    Hydraulic separate type of cutting tools.
Hydraulic Cutting Tools
  • Model No:
    CPC-55A
  • Product Description:
    To cut the telephone cables, steel ropes, round bars, aluminum.
    Hydraulic separate type of cutting tools.
Hydraulic Cutting Tools
  • Model No:
    CPC-85A
  • Product Description:
    To cut the telephone cables, steel ropes, round bars, aluminum.
    Hydraulic separate type of cutting tools.
Hydraulic Cutting Tools
  • Model No:
    CPC-100B
  • Product Description:
    To cut the telephone cables, steel ropes, round bars, aluminum.
    Hydraulic separate type of cutting tools.
Hydraulic Pipe Benders
  • Model No:
    CPB-3
  • Product Description:
    For 1/2"~2" one shot 2 1/2"~4" segment bending
    • Design the opened cover, when iron tube is bend into 900 or 450, you can take it out easily.
    •The materials of 1/2"~2" dies are aluminum, very handy; 2 1/2"~4"...
Hydraulic Pipe Benders
  • Model No:
    CPB-4
  • Product Description:
    For 1/2"~2" one shot 2 1/2"~4" segment bending
    • Design the opened cover, when iron tube is bend into 900 or 450, you can take it out easily.
    •The materials of 1/2"~2" dies are aluminum, very handy; 2 1/2"~4"...
Aluminum Hand Benders
  • Model No:
    CPB-31A
  • Product Description:
    E.M.T 19mm, 25mm, 31mm 45o For 90o
Aluminum Hand Benders
  • Model No:
    CPB-25A
  • Product Description:
    E.M.T 19mm, 25mm, 31mm 45o For 90o
Aluminum Hand Benders
  • Model No:
    CPB-19A
  • Product Description:
    E.M.T 19mm, 25mm, 31mm 45o For 90o
Aluminum Hand Benders
  • Model No:
    CPB-31B
  • Product Description:
    E.M.T 19mm, 25mm, 31mm 45o For 90o
Aluminum Hand Benders
  • Model No:
    CPB-25B
  • Product Description:
    E.M.T 19mm, 25mm, 31mm 45o For 90o
Aluminum Hand Benders
  • Model No:
    CPB-19B
  • Product Description:
    E.M.T 19mm, 25mm, 31mm 45o For 90o
Separate Type Of Compressed Tools
  • Model No:
    N/A
  • Product Description:
    Tai Cheng is professionally engaged in making compressed tool since 1978. Compressed tools we made embraces separate type of compressed tool, direct compression tools, batter-powered compressing tools, hand type ofcompressed tool, copper axis commpre...
Direct Hydraulic Compression Tool
  • Model No:
    N/A
  • Product Description:
    Tai Cheng is professionally engaged in making compressed tool since 1978. Compressed tools we made embraces separate type of compressed tool, direct compression tools, batter-powered compressing tools, hand type ofcompressed tool, copper axis commpre...
Hand Type Of Compressed Tools
  • Model No:
    N/A
  • Product Description:
    Tai Cheng is professionally engaged in making compressed tool since 1978. Compressed tools we made embraces separate type of compressed tool, direct compression tools, batter-powered compressing tools, hand type ofcompressed tool, copper axis commpre...
Copper Axis Compressed Tools
  • Model No:
    N/A
  • Product Description:
    Tai Cheng is professionally engaged in making compressed tool since 1978. Compressed tools we made embraces separate type of compressed tool, direct compression tools, batter-powered compressing tools, hand type ofcompressed tool, copper axis commpre...
Hydraulic Stainless Steel Compressed Tools
  • Model No:
    N/A
  • Product Description:
    Tai Cheng is professionally engaged in making compressed tool since 1978. Compressed tools we made embraces separate type of compressed tool, direct compression tools, batter-powered compressing tools, hand type ofcompressed tool, copper axis commpre...
Hydraulic Cylinder
  • Model No:
    RRH Series
  • Product Description:
    RRH Series of Double Action Middle-Empty Hydraulic Cylinder.
    Tonnage has 30 ton, the max operative pressure: 700 bar.
    TAI CHENG distribute this item, research, develop and manufacture the same grades of products.
    • If over the pressure, release va...
Hydraulic Punch Tool
  • Model No:
    N/A
  • Product Description:
    Hydraulic cylinder, puncher dies set 1/2"~4"Ø,
    the max. size of circle hole:200Omm
    • When the complete of electricity distributed tray, switch case, if want to change the specification, it can be changed easily the size of dies and neve...
Wire Stripper
  • Model No:
    TSC-32
  • Product Description:
    Aluminum alloy material and anode treated.
    •Dies can be changed based on the size of cables.
    •Easy type of stripper dies, only according to the size of the cables to penetrate, then can revolve the handle; copper wire doesn't be hurt and peel q...
Hydraulic Jacks
  • Model No:
    N/A
  • Product Description:
    There are two kinds of designs for the base of hydraulic pump: one is cast iron, the other is original material (excellent quality) single type and double type output 700kg/cm2 Tonage: 2, 4, 6, 8, 12, 20, 30, 50.
Hydraulic Power Pumps (Fuel Pumps)
  • Model No:
    CTE-25AS
  • Product Description:
    1. Quick output oil finished by two-section of high-low pressure, type of suction oil reach the most effective oil capacity.
    2. single hole type of in-out oil controlled uit terminal, cable cut, punch, distributed/equipped electric tray and so on ov...
High Pressure Pumps (Fuel Pumps)
  • Model No:
    FEP-SSJ
  • Product Description:
    1. Quick output oil finished by two-section of high-low pressure, type of suction oil reach the most effective oil capacity.
    2. single hole type of in-out oil controlled uit terminal, cable cut, punch, distributed/equipped electric tray and so on ov...
Hydraulic Hand Pumps (Fuel Pumps)
  • Model No:
    CP-700
  • Product Description:
    This design is for single-hole-operative pump with high, low of two section quick oil output, even through under no electric, it is easy to operate. All the working pressure and function are the same as those power ones, pressure can be kept to stop....
Hydraulic Hand Pumps
  • Model No:
    CP-700-2A
  • Product Description:
    This design is for single-hole-operative pump with high, low of two section quick oil output, even through under no electric, it is easy to operate. All the working pressure and function are the same as those power ones, pressure can be kept to stop....
Hydraulic Foot Pumps (Fuel Pumps)
  • Model No:
    CFP-800-1
  • Product Description:
    This design is for single-hole-operative pump with high, low of two section quick oil output, even through under no electric, it is easy to operate. All the working pressure and function are the same as those power ones, pressure can be kept to stop....
High Pressure Of Pump
  • Model No:
    N/A
  • Product Description:
    Power type output pressure 700kg/cm2 10000PSI
    •Quick output oil finished by two-section of high-low pressure; turbine type of suction oil to reach the most effective oil capacity.
    •Single hole type of in-out oil controlled. To suit the termin...
Hydraulic Foot Pumps
  • Model No:
    CFP-800
  • Product Description:
    This design is for single-hole-operative pump with high, low of two section quick oil output, even through under no electric, it is easy to operate. All the working pressure and function are the same as those power ones, pressure can be kept to stop....
Double Action Hydraulic Power Pumps (Fuel Pumps)
  • Model No:
    CTE-25AD
  • Product Description:
    1. As the general large ton and strike, for example: above 50 ton 120mm S.T oil returned is too slow cause to the spring lack of power, it must demand the oil speed, so use double-active type.
    2. Both entering oil and returing oil for work pressure...
Power Type of Double-Action Hydraulic Pump
  • Model No:
    CTE-25AD
  • Product Description:
    As the general large ton and strike, for example: above 50 TON 120mm S.T oil returned is too slow cause to the spring lack of power, it must demand the oil speed, so use double-active type.
    •Both entering oil and returning oil for work pressure are...
Power Type of Double-Action Hydraulic Pump
  • Model No:
    D-2SW-4 Japan ROYAL
  • Product Description:
    As the general large ton and strike, for example: above 50 TON 120mm S.T oil returned is too slow cause to the spring lack of power, it must demand the oil speed, so use double-active type.
    •Both entering oil and returning oil for work pressure are...
Power Type of Double-Action Hydraulic Pump
  • Model No:
    UP-45SVG-5 Japan NITTOH
  • Product Description:
    As the general large ton and strike, for example: above 50 TON 120mm S.T oil returned is too slow cause to the spring lack of power, it must demand the oil speed, so use double-active type.
    •Both entering oil and returning oil for work pressure are...
Wire Grip
  • Model No:
    SD-1000C
  • Product Description:
    ◆Steel alloy forged and heat treatment, excellent quality.

    ◆Teeth have strong tension enduring, good biting, not easy to slip off and transform.

    ◆CL: Common / AL: Aluminum specialize
Hydraulic Wire Releasing Tray
  • Model No:
    CRS-5M
  • Product Description:
    ◆Horizontal wire releasing design, using the rotate bearing on the ground to reach effort-saving.

    ◆Lightweight, easy to carry, can load the wooden wheel or bulk cable.

    ◆Max. load: 800 Kgs, diameter: D450 mm.
Manual Cable And Wire Stripper
  • Model No:
    ME-A.B.E
  • Product Description:
    ◆ Pocket-size stripper

    ◆ Max. Stripper Range: 3.2mm2
Single-Action Low Height, Flat Type Hydraulic Cylinder
  • Model No:
    RMC-Series
  • Product Description:
    ◆Flat designed for narrow spaces.

    ◆Cylinder is made of high-strength alloy steel, are hardened and not easily deformed.

    ◆Plunger surface is hard chromium, wear and corrosion resistance.

    ◆Strong spring to accelerate the speed of the plunger r...
Single-Action Low Height Type Hydraulic Cylinder
  • Model No:
    RSC-Series
  • Product Description:
    ◆Cylinder is made of high-strength alloy steel, are hardened and not easily deformed.

    ◆Plunger surface is hard chromium, wear and corrosion resistance.

    ◆Strong spring to accelerate the speed of the plunger retraction.
Two-Slices Type Press Plate
  • Model No:
    MP-40/90/115/140/225/300
  • Product Description:
    ◆The forging alloy-steel-made press plates are not easily deformeed.

    ◆Puller work with kinds of different applications, avoiding damage the demolished objects.

    ◆Puller work with kinds of different applications, avoiding damage the demolished ob...
Busbar Cutting Tool
  • Model No:
    CWC-150, CWC-200
  • Product Description:
    ◆Applicable to manufacturing factories, on-off boxes, and switchboard auto-controlled industrial wiring work.

    ◆The horizontal cutter design can avoid wasting material on extra busbar.

    ◆The adjustable bolt helps preventing the busbar from tilted...
Copper Plate Blending Tool
  • Model No:
    CB-150D
  • Product Description:
    ◆Applicable to manufacturing factories, on-off boxes, and switchboard auto-controlled industrial wiring work.

    ◆The liftable design of this tool can easily take out busbar by taking away the tenon if the busbar is to long or in a bended N-shaped o...
Multifunctional Copper Bending & Terminal Compression Tool
  • Model No:
    CBC-25
  • Product Description:
    ◆Has multifunction, including flattening or bending a copper board in to C shape or L-shape.

    ◆Including dies for switching. For a copper board, the max. bending capacity: 30x5mm; the max. flattening capacity: 38mm2.

    ◆Portable, simple to operate...
Enhanced Battery And Charger
  • Model No:
    MTB-12,MAD-12
  • Product Description:
    We know that the charging type tool is a short period work tools, special for rescuing work. It is hard to use for a long period. In order to solve this problem, we develop and launch the products that can be time-expand.
Battery-Powered Ratchet Type Hydraulic Cutting Tool (SoftType)
  • Model No:
    BEC-50
  • Product Description:
    ◆Driving the motor by using the DC voltage and using mechanical ratchet shear to drive the tool cutting.

    ◆Fast cutting, lightweight and effort-saving.

    ◆Suitable for cutting copper and aluminum cables. Maximum cutting capacity: Outer diameter-D...
M-Series V-Shaped Busbar Cutting Tool
  • Model No:
    MC-125V
  • Product Description:
    ◆Applicable to manufacturing factories, on-off boxes, and switchboard auto-controlled industrial wiring work.

    ◆The V-shaped cutter design makes the cutting side smoother by avoiding cutting notches.

    ◆The max. cutting capacity: 125x12.5mm)

    ◆N...
Cobra Enhanced Type Directly Wheel-pulling Tool
  • Model No:
    CK-10inC
  • Product Description:
    ◆The forging alloy-steel-made cylinder and claw hooks are higher-strength not easily deformed, have high safety factor.

    ◆lmitation Cobra type claw hook design, using triangular superficial measure design to withstand the maximum pulling up to 5680...
Directly Type Multiple Tool
  • Model No:
    CPO-5250M
  • Product Description:
    ◆The Integrated hydraulic crimping EHV machine has two-stage, high and low pressures, oiloutput by squeezing manually. The maximum output pressure: 700kg/cm2 (10000psi).
    ◆Easy to operate, lightweight and easy to carry, high mobility. Suitable to use...
Separate Screw Nut Cutting Tool
  • Model No:
    CNC-1319/1924/2432/3241/4150/5060/6075
  • Product Description:
    The main part is made of alloy steel. Lightweight design, easy to operate, not easy to be damaged.

    ◆The alloy-steel-made on the edge of a blade can get rid of a11 kinds of none-hardness screw nuts.
MG-Series Wire Pulling Net
  • Model No:
    MG-Series
  • Product Description:
    ◆General indoor cable pulling,applicable to the optical fiber lines.

    ◆Steel rope are soft and high elasticity. Easy to mount cables and through curves.

    ◆Medium Duty nets, using in the distribution panel to drag the cables, suitable for medium a...
Rotate Connector
  • Model No:
    HGS-750/HGS-1500/HGS-3500
  • Product Description:
    * Construction of ovehead or underground cables. To prevent cable from distortion.

    * Using a special alloy steel,durable.

    * Small size, high tension force.
Multifunction Single Layer Tray
  • Model No:
    CRS-4
  • Product Description:
    * Horizontal wire releasing design, usingthe rotate bearing on the ground to reach effort-saving.
    * Lightweight, easy to carry, can load the wooden wheel or bulk cable.
    * There are two sizes of the wood plate for choosing: D600mm and D900mm.
    * Max...
Toe Jack
  • Model No:
    SL Series
  • Product Description:
    Toe jacks are generally used in the objects that is low from the ground, and the general jack cannot facilitate well. As a result, needing the claws part to withatand the objects and lift them.
Hollow Type Wheel-pulling Tool
  • Model No:
    CPS-10/CPS-20/CPS-30/CPS-50
  • Product Description:
    ◆The alloy-steel-made cylinder and claw hooks are not easily deformed, have high safety factor.

    ◆A combined design of 2-&/3-claws and claws in different lengths can be used in and switching for different working environments.

    ◆Unique cente...
ACSR Dedicated Stripper
  • Model No:
    ACSR-87
  • Product Description:
    With a the rotating blade to strip LGJ aluminum surface, cut surface smoothly. Do not hurt or flattened strand wire.
PE Insulate Cable Stripper
  • Model No:
    TSC-130
  • Product Description:
    Adjustable bolt design, free to adjust the outer diameter of cable, do not need to change the mold.

    Using the bearing rotation design, simple operation, easy to rotate and strip the cable.
Hole Saw
  • Model No:
    Holesaw
  • Product Description:
    ◆An alloy steel 3-knives compound cutter, which includes an external knife, a center knife, and an internal knife. Therefore, it has higher maintenance and lower chances of being broken or fallen apart.

    ◆The extension edge of the head part has a r...
Open Terminal Pincer
  • Model No:
    CYO-150
  • Product Description:
    ◆Mechanical operations, using a simple bolt adjustment pressing size, easy to carry.

    ◆Suitable for crimping bare terminal.
Bare Terminal Pincer
  • Model No:
    MH-38H
  • Product Description:
    Lightweight, easy to operate and carry spring type contraction safe effort. Suitable for crimping bare terminal.
Ratchet PVC Pipe Cutting Tool
  • Model No:
    MPC-6
  • Product Description:
    A specialized ratchet-feed-design cutter for PVC plastic pipe cutter has lightweight, and able to perate with one hand.
Portable Band Saw Machine
  • Model No:
    UE-100S
  • Product Description:
    *A small multifunctional saw, which is able to cut off cables, irons bars, pipes, tubes, angle irons, aluminum materials, plastic pipes, woods, and other materials.

    *The holder keeps objects steady and balanced, prevents wrinkles on the cutting su...
Cable Cutting Set
  • Model No:
    250AT-30YC
  • Product Description:
    ◆Blades are mode of special alloy steel. It is suitable to use on cutting soft wire and communications cables.

    ◆Maximum cutting opening: D30mm(240mm)
Cutting Hand Tool
  • Model No:
    MI-60
  • Product Description:
    ◆A specialized cutter for steel cables, steel strands, and iron bars, has lightweight, is easy to carry and cut, the cuttingside is neat.

    ◆The aluminum handle can replace blades, also has the cut-off position fixed.

    ◆The arc blade design can ef...
Ratchet Cutting Hand Tool
  • Model No:
    CS-325
  • Product Description:
    ◆A specialized ratchet-feed-design cutter, for copper-aluminum wires and cables, has lightweight, and able to operate with one hand.

    ◆The plastic handle is ergonomically designed for gripping more comfortable and convenient.

    ◆The blade can rota...
Directly Screw Nut Cutting Tool
  • Model No:
    CNC-2432A
  • Product Description:
    A one-shaped EHV-hydraulic cutting machine uses two-stage manual oil output-high and low voltages. The max. output pressure: 700kgf/c㎡(10000psi)
    Lightweight, easy to carry and operate, suitable for working high above the ground.
    The alloy-steel-mad...
Directly Screw Nut Cutting Tool
  • Model No:
    CNC-1924A
  • Product Description:
    *A one-shaped EHV-hydraulic cutting machine uses two-stage manual oil output-high and low voltages. The max. output pressure: 700kgf/c㎡(10000psi).

    *Lightweight, easy to carry and operate, suitable for working high above the ground.

    *The alloy-s...
Large Angle Steel Cutting Tool
  • Model No:
    CAC-110
  • Product Description:
    ◆Desing especially for cutting angle steels. Applicable to use in high-pressured electrical towers, bridges, and othe angle steels.

    ◆Speed cutting without noise, smooth on the cutting area, and easy to carry.

    ◆The max. cutting capacity: 110x110...
Separate Type Cutting Tool
  • Model No:
    CC-50B-A (Soft Type)
  • Product Description:
    * A single-loop cutter tool, lightweight, easy to carry and opterate.
    * The special alloy steel blade is made for nicely cutting hard wires without breaking.
    * The max. cutting opening: D50mm (630mm2).
    * Need to coordinate with hydraulic pump (aut...
Separate Type Cutting Tool
  • Model No:
    CPC-20B (Hard Type)
  • Product Description:
    ◆A single-loop cutter tool, lightweight, easy to carry and opterate.

    ◆The special alloy steel blade is made for nicely cutting hard wires without breaking.

    ◆The max. cutting opening: D35mm.

    ◆Need to coordinate with hydraulic pump (automatic:...
Battery-Powered Hydraulic Cutting Tool (HardType)
  • Model No:
    REC-40
  • Product Description:
    ◆EHV rechargeable crimping machine, driving the motor of hydraulic pump by using the DC voltage 14.4V and drive high tonnage output, maximum output pressure can up to 700kgf/cm2(10000ps)

    ◆Use-friendly, lightweight, portable, suitable for fast resc...
Terminal Compression Set
  • Model No:
    TAC-250AT-T250
  • Product Description:
    ◆ㄇ-shaped onenings are attached to the mold can be replaced. Hexagonal crimping form. The maximum size: 240mm square crimping.

    ◆The dies can be customized in any size.
Large Tonnage Hydraulic Compression Tool
  • Model No:
    CO-200D
  • Product Description:
    * Double-action compression tooI, large tonnage, simple, available for widely compression function.
    * The material of tool made of high carbon steel, heat treatment, not easily deformed.
    * Hexagonal crimping, crimping range refer the parameters.
    *...
Separate Hydraulic Compression Tool
  • Model No:
    CO-630B
  • Product Description:
    * Single-action compression tool, lightweight, easy to operate and carry.
    * The material of tool made of high carbon steel, heat treatment, not easily deformed.
    * ㄇ-shaped head, accessory dies can be replaced, hexagon compression type, compression ...
Directly Hydraulic Compression Tool
  • Model No:
    CPO-240B
  • Product Description:
    *Single-action compression tool, lightweight, easy to operate and carry.
    *The material of tool made of high carbon steel, heat treatment, not easily deformed.
    *H-shaped head, accessory dies can be replaced, hexagon compression type, compression max...
Double-Action Power Pump
  • Model No:
    CTE-25ADV
  • Product Description:
    ◆High-pressure hydraulic power pump, accompanied with a variety of single-hole hydraulic tools, driven by a motor at high speed two-section high and low pressure quickly out of oil, with manually switch four-direction, three-position valve.

    ◆In ca...
Busbar Straight-Band Tool
  • Model No:
    CB-200A
  • Product Description:
    *Applicable to manufacturing factories, on-off boxes, and switchboard auto-controlled industrial wiring work.

    *The use f the axis in large-area-bending design prevents the busbar from twisted while bending.

    *Provides angle and scale for control...
Busbar Flat-Bending Tool
  • Model No:
    MB-125/MB-150
  • Product Description:
    ◆Applicable to manufacturing factories, on-off boxes, and switchboard auto-controlled industrial wiring work.

    ◆The use of the axis in large-area-bending design prevents busbar from twisted while bending.

    ◆Able to easily control bending angles. ...
M-Series Busbar Punching Tool
  • Model No:
    MP-125
  • Product Description:
    ◆Applicable to punch on angle steels, iron plates, H beams, copper and aluminum busbar.
    ◆Can punch presisely, easy to place, reduce burrs on a busbar.
    The max. punching capacity: Copper and aluminum busbar- D20.5x12.5mm, iron busbar- D20.5x8mm.
    ◆N...
Complex Hydraulic Busbar Tool
  • Model No:
    MPCB-301
  • Product Description:
    ◆Contains three functions: punching,flat bending, and cutting busbar.

    ◆Punching: punching precisely, fewer glitches, depth in 70mm.

    ◆The max. punching capacity - copper and aluminum: 020.5x10mm, iron: D20.5x8mm.

    ◆Flat bending: completes a 90...
Hydraulic Wire Releasing Tray
  • Model No:
    CRS-46
  • Product Description:
    ◆Using the hydraulic jacks, lift the cable tray up, use bearing drive the cable releasing, easy and effort-saving.

    ◆Suitable for outdeoor underground cable line and air-lines operations, house construction and other switchboard wiring.

    ◆With fi...
Mini Stripper
  • Model No:
    KS-170
  • Product Description:
    *Stripping length can be adjusted.
Cable Stripper
  • Model No:
    TSC-240
  • Product Description:
    ◆Altitude bifurcation line dedicated stripper.

    ◆Replaceable blade, with different diameter to take the epidermis off, the cut surface is smooth, fast and easy.

    ◆Handle is made of F.R.P material that can insulate voltage.
Cable Stripper
  • Model No:
    TSC-25/TSC-40
  • Product Description:
    ◆PE insulate calbe stripper.

    ◆Adjustable bolt design, free to adjust the outer diameter of cable, do not need to change the mold.

    ◆Using the bearing rotation design, simple operation, easy to rotate and strip the cable.
Standard Battery And Charger
  • Model No:
    REC-14,REC-7300
  • Product Description:
    We know that the charging type tool is a short period work tools, special for rescuing work. It is hard to use for a long period. In order to solve this problem, we develop and launch the products that can be time-expand.
Battery-Powered Hydraulic Screw Nut Cutting Tool
  • Model No:
    REC-M36
  • Product Description:
    ◆EHV rechargeable crimping machine, driving the motor of hydraulic pump by using the DC voltage 14.4V and drive high tonnage output, maximum output pressure can up to 700kgf/cm2(10000ps)

    ◆Use-friendly, lightweight, portable, suitable for fast resc...
Single-Action Power Pump
  • Model No:
    UP-35RH-NC
  • Product Description:
    ◆High-pressure hydraulic power pump, accompanied with a variety of single-hole hydraulic tools, driven by a motor at high speed two-section high and low pressure quickly out of oil, the maximum output pressure 700kgf/cm²(10000psi).

    ◆Electric hydra...
Battery-Powered Hydraulic Compression Tool
  • Model No:
    REC-400
  • Product Description:
    ◆EHV rechargeable crimping machine, driving the motor of hydraulic pump by using the DC voltage 14.4V and drive high tonnage output, maximum output pressure can up to 700kgf/cm2(10000ps)

    ◆Use-friendly, lightweight, portable, suitable for fast resc...
Battery-Powered Type Tool
  • Model No:
    REC-5250M
  • Product Description:
    ◆The EHV rechargeable host and the DC-driver-motor-hydraulic pump drive high tonnage output. The output pressure: 700kg/cm2 (10000psi) - Has two-stage inlet, high and low pressures.

    ◆Easy to operate, lightweight and easy to carry, high mobility. S...
Battery-Powered Hydraulic Compression Tool
  • Model No:
    REC-250H
  • Product Description:
    ◆ EHV rechargeable crimping machine, driving the motor of hydraulic pump by using the DC voltage 14.4V and drive high tonnage output, maximum output pressure can up to 700kgf/cm²(10000psi)

    ◆ Use-friendly, lightweight, portable, suitable for fast r...
Battery-Powered Hydraulic Compression Tool
  • Model No:
    REC-250C
  • Product Description:
    ◆EHV rechargeable crimping machine, driving the motor of hydraulic pump by using the DC voltage 14.4V and drive high tonnage output, maximum output pressure can up to 700kgf/cm²(10000psi)

    ◆Use-friendly, lightweight, portable, suitable for fast res...
Hydraulic Type Of Angle Steel Cutting Tools
  • Model No:
    N/A
  • Product Description:
    Separate type of hydraulic screw eraser.
    •It is specialized in cutting angle steel, cutting the distributed electricity high pressure iron tower of angle steel.
    •The surface is smooth to be operated in outdoor, easy to carry.