657685223

Shun Chuan Machinery Ind Co.,Ltd.

Tel:886-37-741591       Fax:886-37-741593
Address:No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan

Products

High Speed Precision Lathes

High-Speed-Precision-Lathes-6

  • Model No: TML-1640
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

•All models with one piece solid stand.
•All models with universal feed gearbox & reversable apron.
•All models meet CE. (on request)
•All models with 52.5mm (2.066") spindle bore, ASA D1-6.
•All castings are properly stabilized and stress relieved.
•Bed ways are hardened & ground to min. HS-70.
•Turcite B coating between the bed and carriage.
•Extremely low noise level.
•Foot brake pedal provided.
•Built-in coolant pump & fitting provided.
•Wider bed way which give absorbs vibration.

Specification :

STANDARD ACCESSORIES:

  1. Backplate for 9" chuck
  2. Dead center MT.4
  3. Dead center MT.4 with carbide tip
  4. Spindle center sleeve MT.6
  5. Level pads......6 pcs
  6. Tool set & Box
  7. Operation manual & parts list

OPTIONAL ACCESSORIES:

  1. 3-Jaws scroll 9" chuck
  2. 4-Jaws independent 10" chuck
  3. 5C collet closer attachment
  4. 5C collets (metric or inch)
  5. Driving plate with dog
  6. Chuck safety guard
  7. Hydraulic copying attachment
  8. Tool post grinder attachment
  9. Taper turning attachment
  10. Electrical system for CE
  11. Protect cover on leadscrew for CE
  12. Steady rest w/ball bearing
  13. Follow rest w/bronze tip
  14. Faceplate 12"
  15. Drill chuck & arbor
  16. Rotating center MT.4
  17. Halogen lamp
  18. Quick change tool post
  19. Carriage micro stop set
  20. Digital read out system
  21. Full length splash guard

SPECIFICATIONS:

MODELTML-1640TML-1660
CapacityHeight of centers205 mm (8.07")
Swing over bedØ410 mm (16.14")
Swing in gapØ583 mm (22.95")
Swing over cross slideØ262 mm (10.3")
Distance between centers1000 mm (40")1500 mm (60")
Width of bed260 mm (10.236")
Gap width in front of faceplate135 mm (5.31")225 mm (8.85")
Headstock and
Main Spindle
Spindle nose, internal taperD1-6, MT. No.6
Spindle center sleeveMT. No.6 x MT. No.4
Spindle boreØ52.5 mm (2.066")
Spindle speed:Gear steps
/
Range
12 steps /36~1800 R.P.M.
L365070105
M130180250380
H62090012001800
CarriageLength on bed / Width of carriage513 mm (20.19") / 412 mm (16.22")
Cross slide travel220 mm (8.6")
Top slide travel130 mm (5.1")
Threads and FeedsWhitworth threads: Kinds / Range45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds0.05~1.7 mm (0.002"~0.067")
Cross feeds0.025~0.85 mm (0.001"~0.034")
TailstockQuill diameterØ52 mm (2.47")
Quill travel152 mm (6")
Taper of centerMT.No.4
MotorMain spindle5HP
Coolant pump1/8HP
MeasurementWeight (Net /Gross) Approx.1500 / 1650 kgs1600 / 1750 kgs
Packing sizesLength2270 mm (89.4")2785 mm (109.7")
Width x HeightWidth 1120 mm (44.1") x Height 1900 mm (74.8")

Specifications subject to change without notice.

Shun Chuan Machinery Ind Co.,Ltd.

  • Taiwan
  • No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
  • 886-37-741591
  • 886-37-741593
  • 657685223