657363834

Earth-Chain Enterprise Co., Ltd.

Manufacturing and Selling the Magnetic Tools.

All Products

Grinding Liquid
  • Model No:
    233A/903/KEROSENE LIGHT OIL DIESEL
  • Product Description:
    1. The function of liquid 233A:Prevent rust, polishing, cooling and cleaning.
    2. The slurry is applied continuously for grinding about 90 minutes, and then the temperature can reach at 70 ℃, please notice to replace in turn.
    3. If the surface conta...
Drill Grinder (Easy Fast Precision)
  • Model No:
    EDG-1226N (Ø12mm-Ø26mm)
  • Product Description:
    * Eay to operate, no experience required for grind a precise drill.
    * 10 seconds to grind a precise drill for an expert.
Electro-Permanent Magnetic Chuck
  • Model No:
    EEPM-CIR Series
  • Product Description:
    Suitable for use on Vertical Lathe, CNC 5 Axis Machining Center and etc.
Drill Grinder (Ø2.5mm-Ø13mm)
  • Model No:
    EDG-213N
  • Product Description:
    * 10 seconds to grind a precise drill for an expert.
    * Eay to operate, no experience required for grind a precise drill.
Magnetic Deburring And Polishing Machines
  • Model No:
    HD-728
  • Product Description:
    *Model:HD-728
    *Dimension (L x W x H):410 x 530 x 970mm
    *Tank Size (L x W):280 x 280mm
    *Power:220VAC (50/60HZ)
    *Weight:65KG
Magnetic Deburring And Polishing Machines
  • Model No:
    HD-716
  • Product Description:
    *Model:HD-716
    *Dimension (L x W x H):270 x 225 x 295mm
    *Tank Size (L x W):160 x 160mm
    *Power:110/220VAC (50/60HZ)
    *Weight:16KG
Magnetic Deburring And Polishing Machines
  • Model No:
    HD-735
  • Product Description:
    *Model:HD-735
    *Dimension (L x W x H):560 x 630 x 1020mm
    *Tank Size (L x W):420 x 380mm
    *Power:220VAC (50/60HZ)
    *Weight:100KG
Magnetic Deburring And Polishing Machines
  • Model No:
    HD-7100Ⅱ
  • Product Description:
    1.Grinding magnetic field moves horizontally. Grinding without dead corners.
    2.Suitable for a long or large workpiece. Suitable for magnetic materials.
Magnetic Deburring And Polishing Machines
  • Model No:
    HD-745
  • Product Description:
    *Model:HD-745
    *Dimension (LxWxH):610x700x1120mm
    *Tank Size (LxW):520x460mm
    *Power:220VAC 15A
    *Weight:150KG
Magnetic Pins Separator
  • Model No:
    HD-712
  • Product Description:
    Grinding magnetic field moves horizontally. Grinding without dead corners.
    Suitable for a long or large workpiece. Suitable for magnetic materials.
Magnetic Deburring And Polishing Machines
  • Model No:
    HD-750CL
  • Product Description:
    *Model:HD-750CL
    *Dimension (L x W x H):810 x 790 x 1070mm
    *ank Size (L x W):600 x 540mm
    *Power:220VAC (50/60HZ)
    *Weight:150KG
Vibration Separator
  • Model No:
    EVS-R580
  • Product Description:
    Magnetic pin (needle) and workpiece are separated.
    Using of vibration theory to choose the different screen sizes, so the pins can be quickly and easily separated from the workpiece.
    Please specify the voltage and frequency(50Hz or 60Hz) when place...
SG High Speed Drill Grinders
  • Model No:
    EDSG-313
  • Product Description:
    1. EDG series, easy fast precision.
    2. Ø3mm-Ø13mm.
Lifting Magnets
  • Model No:
    ELM-V
  • Product Description:
    *Fast loading for vertical transport.
    *One person can load and unload.
    *No dangerous straps & slings.
Super Length Hydraulic Arm Magnetic Stands (Magnetic Tools )
  • Model No:
    ECE-300ALL
  • Product Description:
    1. Super length, suitable for measuring on big machine.
    2. Maximum length reach go 600mm.
    3. Made by aluminum alloy, light and easy to operate.
    4. Principle of hydraulic, stable and accuracy.
Lifting Magnets
  • Model No:
    ELM-L
  • Product Description:
    *For better overall balance.
    *OUse with multiple lifters.
    *Lifter span adjustable.
Magnetic Deburring and Polishing Machines
  • Model No:
    HD-765
  • Product Description:
    1. 12KG grinding capacity.
    2. Max. processing capacity (reference value):
    (1) 12kg: copper, stainless steel, aluminum, zinc(non-magnetic material).
    (2) 5kg: iron, steel, stainless steel (magnetic material).
    3. Weight:
    (1) Stainless pins/12KG(st...
Electronic Digital Calipers
  • Model No:
    ECD-150C, ECD-200C, ECD-300C
  • Product Description:
    1. Digital type with large LCD, easy to read.
    2. With zero setting installation, can be makes comparing mensuration.
    3. Metric/inch interchange switch, convenient to use both of metric & inch size.
    4. A PC box included.
Permanent Magnetic Clamping Block
  • Model No:
    ECB
  • Product Description:
    The all new model Magnetic Clamping Block ECB Series are a new sense of clamping way for metal working on CNC Machining Center and Milling Machine in quick clamp workpieces.
    Free to set up position, numbers and distance of Magnetic Clamping Block ac...
Bat Type Demagnetizers (Magnetic Tools)
  • Model No:
    EHDB-210
  • Product Description:
    1. Suitable for demagnetizing stamping metalwork, ejection mold, etc.
    2. Portable type for demagnetizing a narrow part of large steel plate.
    3. Can demagnetize the mold on machine directly to reduce damages by chips while stamping metalwork continu...
Lifting Magnets
  • Model No:
    ELM-H
  • Product Description:
    Loading large plate on the table with a fork lift was difficult time consuming and posed a potential safety hazard.
    ELM-L Workholding to design a system for a single operator to use permanent lifting magnets and a special spreader bar to handle a ba...
Cutting Tool Demagnetizers (Magnetic Tools)
  • Model No:
    HDO-40
  • Product Description:
    1. Handle type, easy and convenient to operate.
    2. Suitable for demagnetized cutting tools such as drill, tap, end milland road material...ect.
    3. Can be demagnetized the cutting tool on machine directly.
    4. Working rate: 20% ED (operating for 1 m...
Permanent Magnetic Clamping Block
  • Model No:
    ECB-120V12
  • Product Description:
    Suitable for use on CNC Horizontal Machining Center. (Can do 5 sides machining)
Electro-Permanent Magnetic Chuck
  • Model No:
    EEPM SERIES
  • Product Description:
    Super power magnetic force 1000kgf/100cm2. (4 Poles) 3~10 seconds control for power ON & OFF. No electric power supply required to keep the magnetic chuck ON. Safety in case of power failure. No power supply to keep the magnetic chuck ON, it coul...
Machining Type Permanent Magnetic Chuck
  • Model No:
    EHMT Series
  • Product Description:
    It will never change the accuracy of working surface during switch ON and OFF.
    With perfect water proof, can be used in liquid.
    EHMT-3060B and above are dual switch
Electro-Permanent Magnetic Index Table
  • Model No:
    EEPM-IT
  • Product Description:
    1. We changed traditional clamping way of index table. Made with Electro-Permanent magnetic chuck, can do 5 side machining, without any obstructed movement of cutters during machining.
    2. Super magnetic force 1000kgf/100cm2. (4 Poles)
    3. Structur...
Electro-Permanent Magnetic Chuck
  • Model No:
    EEPM-V
  • Product Description:
    1. Super power magnetic force 1250kgf/100cm2+-5%. (4 Poles)
    2. Control each working face for ON and OFF, so it can be load and unload the workpiece on each working face. 3~10 seconds control for power ON and OFF.
    3. Each EEPM-V type can be clamp mu...
Lifting Magnets
  • Model No:
    ELM
  • Product Description:
    1. Made by "Rare Earth" magnet with technology of improvement.
    2. All new models with "light weight" "less dimension" and "lower price".
    3. Made by permanent magnet, require no power supply, thus eliminatin...
Electro-Permanent Magnetic Chuck
  • Model No:
    EEPM-CIRS
  • Product Description:
    1. Suitable in use for combine with Rotary type Surface Grinding machine, CNC 5 Axis Machining Ceter...etc.
    2. Minimum thickness of workpiece required : 10 mm
    3. Minimum size of workpiece required as 4 alternate magnetic square poles and above cont...
Drill Grinder And End Mill Re-Sharpeners
  • Model No:
    EMG-1225
  • Product Description:
    1. Capacity: Ø12mm - Ø25mm.
    2. Grinding wheel:
    (1) CBN #150 x 1PC.
    (2) SDC #150 x 1PC.
    3. Motor: 1000W.
    4. R.P.M.: 4300 R.P.M.
    5. Easy, fast, precision.
Drill Grinder And End Mill Re-Sharpeners
  • Model No:
    EMG-413
  • Product Description:
    1. Capacity: Ø4mm - Ø13mm.
    2. Grinding wheel:
    (1) SDC Wheel #300 for Ø4mm-Ø5m.
    (2) SDC Wheel #300/#120 for Ø6mm-Ø13mm.
    3. Motor: 3/4 HP 450W.
    4. R.P.M.: 6000 R.P.M.
    5. Easy, fast, precision.