657644626

Chandox Precision Industrial Co., Ltd.

Tel:886-4-7978666       Fax:886-4-7978660
Address:No. 4, Gong 1st Rd., Shengang Shiang, Changhua County 509, Taiwan

All Products

Air Feed Tube
  • Model No:
    MTB
  • Product Description:
    *Air Feed Tube
3-Jaw Solid Power Chucks
  • Model No:
    CL-DP
  • Product Description:
    *3-Jaw Solid Power Chucks
    *Model: CL-DP
Large Through Hole Super Thin Hollow Rotary Hydraulic Cylinder
  • Model No:
    P-S
  • Product Description:
    *Large Through Hole Super Thin Hollow Rotary Hydraulic Cylinder
    *Model: P-S
Compact Solid Rotary Hydraulic Cylinder
  • Model No:
    LS-RE
  • Product Description:
    *Compact Solid Rotary Hydraulic Cylinder
    *Model: LS-RE
High Speed Compact Hollow Rotary Hydraulic Cylinders
  • Model No:
    PA
  • Product Description:
    *High Speed Compact Hollow Rotary Hydraulic Cylinders
    *Model: PA
Solid Rotary Hydraulic Cylinder
  • Model No:
    L-RC
  • Product Description:
    *Solid Rotary Hydraulic Cylinder
    *Model: L-RC
2 Jaw High Speed Hollow Power Chucks
  • Model No:
    OPT
  • Product Description:
    2-Jaw high speed hollow power chucks, it's suitable for CNC lathe and the forth axes:
    1. High speed.
    2. It's gripped through hydraulic power and strong clamping force.
    3. It can be matched with bar feeder and bar stopper with its hollow de...
Large Through Hole Super Thin Hollow Rotary Hydraulic Cylinders
  • Model No:
    P-S
  • Product Description:
    1. Super thin & lightweight:
    Super thin outer structure makes the weight lighter than the traditional rotary cylinders; meanwhile, the compactness and miniaturization lower the burden of machines.
    2. Large thru-hole diameter:
    With large ope...
Large Through Hole 3-Jaw High Speed Power Chucks
  • Model No:
    OPB
  • Product Description:
    1. It's suitable for CNC lathe.
    2. It's gripped by hydraulic power and strong clamping force.
    3. Large through hole.
    4. High speed.
Solid Rotary Hydraulic Cylinders
  • Model No:
    L-R
  • Product Description:
    1. Super thin structure:
    Super thin outer structure reduces the interference with machines and lowers the burden of machines.
    2. Built-in check valve:
    With built-in "check valve", work pieces can be effectively prevented from flying o...
Pull Back Power Chucks
  • Model No:
    PL
  • Product Description:
    Pull back feature of radial gripping will lead to almost no work piece uplifting displacement; CHANDOX pull back power chucks are ideal for machining casting and forging parts.
    1. By appressing the gripping work piece to the surface, CHANDOX pull ba...
2 Jaw Super Precision Air Chucks (Lathe Chucks)
  • Model No:
    TK-T
  • Product Description:
    1. Pre-machined tapped holes and lubrication path: there are tapped holes for fixing jigs, thus, additional screw machining is not necessary, and pre-machined lubrication path can connect to auto-lubrication unit to lubricate the chuck automatically....
2 Jaw Solid Power Chucks
  • Model No:
    CLT
  • Product Description:
    1.It's suitable for CNC lathe and special purpose machines.
    2. It can be gripped through hydraulic power and strong clamping force.
    3. High speed.
Rotary Air Chuck Fixtures
  • Model No:
    RT
  • Product Description:
    Suitable for light cutting:
    1. It’s ideal for dividing or cutting work pieces by mounting the chuck on indexing table or rotary table. The distinctive feature is that the chuck rotates with the spindle of indexing table or rotary table.
    2. Rustpro...
3 Jaw Solid Power Chucks
  • Model No:
    CL
  • Product Description:
    1.It's suitable for CNC lathe and special purpose machines.
    2. It can be gripped through hydraulic power and strong clamping force.
    3. High speed.
3 Jaw Scroll Chucks
  • Model No:
    SC
  • Product Description:
    It's suitable for lathe and drilling machine and milling machine.
6 Jaw Awl Type Chucks
  • Model No:
    AS
  • Product Description:
    1. It's suitable for CNC tool or cutter grinding machine.
    2. It is particular for polishing drills.
Solid Rotary Hydraulic Cylinders
  • Model No:
    L
  • Product Description:
    It's suitable for CNC lathe.
    1. Super thin structure:
    Super thin outer structure reduces the interference with machines and lowers the burden of machines.
2 Jaw Hollow Power Chuck Fixtures
  • Model No:
    MOT
  • Product Description:
    1. With built-in type cylinder, it is ideal for machining application on working table.
    2. Rust-proof for Pneumatic Cylinder: inside wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty o...
4 Jaw Scroll Chucks
  • Model No:
    PS
  • Product Description:
    1. It's suitable for lathe and drilling machine and milling machine.
    2. It can be applied to different kinds of machine tools.
3 Jaw Hollow Power Chuck Fixtures
  • Model No:
    MO
  • Product Description:
    1. With built-in type cylinder, it is ideal for machining application on working table.
    2. Rust-proof for pneumatic cylinder: inside wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty o...
2 Jaw Super Precision Air Chuck Fixtures
  • Model No:
    MTK-T
  • Product Description:
    1. Pre-machinesd tapped holes and lubrication path: there are tapped holes for fixing jigs, thus, additional screw machining is not necessary, and pre-machined lubrication path can connect to auto-lubrication unit to lubrication the chuck automatical...
CNC Pullers For CNC Lathes
  • Model No:
    LZ
  • Product Description:
    Bar puller is great for installing on the turret of CNC lathes or other automatic special purpose machines to substitute for automatic bar feeder. For the repetitive pulling length is very accurate; the use of Bar Puller is a very convenient and effe...
3 Jaw Super Precision Air Chuck Fixtures
  • Model No:
    MTK
  • Product Description:
    1. Pre-machinesd tapped holes and lubrication path: there are tapped holes for fixing jigs, thus, additional screw machining is not necessary, and pre-machined lubrication path can connect to auto-lubrication unit to lubrication the chuck automatical...
3 Jaw Super Precision Air Chucks
  • Model No:
    TK
  • Product Description:
    1. Pre-machinesd tapped holes and lubrication path: there are tapped holes for fixing jigs, thus, additional screw machining is not necessary, and pre-machined lubrication path can connect to auto-lubrication unit to lubrication the chuck automatical...
3 Jaw High Speed Hollow Power Chucks
  • Model No:
    OP
  • Product Description:
    3-Jaw high speed hollow power chucks, it's suitable for CNC lathe and the forth axes:
    1. High speed.
    2. It's gripped through hydraulic power and strong clamping force.
    3. It can be matched with bar feeder and bar stopper with its hollow de...
3 Jaw Air Chuck Fixtures
  • Model No:
    MR
  • Product Description:
    It's suitable for fifth axes rotary table.
4 Jaw High Speed Hollow Power Chucks (Lathe Chucks)
  • Model No:
    OPF
  • Product Description:
    4-Jaw high speed hollow power chucks, it's suitable for CNC lathe and the forth axes:
    1. High speed.
    2. It's gripped through hydraulic power and strong clamping force.
    3. It can be matched with bar feeder and bar stopper with its hollow de...
3 Jaw Air Chuck Fixtures Built-in 2 Cylinders
  • Model No:
    MR-S
  • Product Description:
    It's suitable for fifth axes rotary table.
Super High Speed Hollow Rotary Hydraulic Cylinders
  • Model No:
    P
  • Product Description:
    1. Large thru-hole diameter:
    With large open center, gripping range of bar stock can be increased.
    2. Built-in check valve:
    With built-in "check valve", work pieces can be effectively prevented from flying out during abrupt failure of...
Bar Stoppers
  • Model No:
    PE
  • Product Description:
    1. It's suitable for hydraulic cylinders.
    2. It can be used to fix the position of the work piece when it's manufacturing to certain length.
Soft Jaws ( SJ Series) For Hydraulic Chucks
  • Model No:
    SJ
  • Product Description:
    It's suitable for hydraulic chucks and pneumatic chucks. It can be shaped to fit the work pieces.
Super Thin Square Chucks
  • Model No:
    MC
  • Product Description:
    1. It's suitable for CNC machine center.
    2. MC chucks are precisely ground, the tolerances of W, X, Y, Z among chucks are within 0.05mm.
    3. Soft jaws can be used alternatively for machining special shaped work pieces, to substitute for designin...
Hard Jaws (HJ Series) For Hydraulic Chucks
  • Model No:
    HJ
  • Product Description:
    It's suitable for hydraulic chucks and pneumatic chucks.
Super Thin Chucks
  • Model No:
    SE
  • Product Description:
    1. It's suitable for roundness instruments.
    2. By the compactness comes from "light, thin, short, small" designing concept; the chucks are most fitting to hold work pieces for measuring.
    3. Just rotate the chuck knob directly for grip...
Mounting Plates
  • Model No:
    N/A
  • Product Description:
    Chandox mounting plates are available to any kinds of spindle noses.
2 Jaw Steel Body Chucks
  • Model No:
    TNT
  • Product Description:
    1. It's suitable for lathe and grinding machine.
    2. Can be used as a "forming plate" for machining soft jaws.
    3. Hard jaws and soft jaws can be adjusted just like on a power chuck to increase the gripping range.
    4. Hard jaws as well ...
3 Jaw Powerful Type Scroll Chucks
  • Model No:
    SK
  • Product Description:
    1. It's suitable for lathe and drilling machine and milling machine.
    2. It can be applied to different machine tools.
    3. It can be replaced by power soft jaws.
3 Jaw Steel Body Chucks
  • Model No:
    NT
  • Product Description:
    1. It's suitable for lathe and grinding machine.
    2. Can be used as a "forming plate" for machining soft jaws.
    3. Hard jaws and soft jaws can be adjusted just like on a power chuck to increase the gripping range.
    4. Hard jaws as well ...
4 Jaw Powerful Type Scroll Chucks
  • Model No:
    PSK
  • Product Description:
    1. It's suitable for lathe and drilling machine and milling machine.
    2. It can be applied to different machine tools.
    3. It can be replaced by power soft jaws.
3 Jaw Adjustment Steel Body Scroll Chucks
  • Model No:
    CT
  • Product Description:
    1. It's suitable for lathe and grinding machine.
    2. Chuck body is made of steel to enhance safety operations for high speed machining.
    3. The chuck handle can be operated easily and smoothly.
    4. Inside and outside jaws adopt the design of hydr...
3 Jaw A1 Type Chucks (Lathe Chucks)
  • Model No:
    A1
  • Product Description:
    1. It's suitable for lathe machine.
    2. A1 series can be connected to the spindle directly.
4 Jaw Adjustment Steel Body Scroll Chucks
  • Model No:
    FCT
  • Product Description:
    1. It's suitable for lathe and grinding machine.
    2. Chuck body is made of steel to enhance safety operations for high speed machining.
    3. The chuck handle can be operated easily and smoothly.
    4. Inside and outside jaws adopt the design of hydr...
Powerful Type Super Thin Chucks
  • Model No:
    NBK
  • Product Description:
    1. It's suitable for CNC machine center.
    2. The handle with an angle of 30 degrees is much convenient for operations.
    3. The "super thin thickness" design of chucks increase the "allowable distance"of machining operations.
    ...
2 Jaw Powerful Type Adjustment Steel Body Scroll Chucks
  • Model No:
    TKT
  • Product Description:
    1. It's suitable for lathe and grinding machine.
    2. Chuck body is made of steel to enhance safety operations for high speed machining.
    3. The chuck handle can be operated easily and smoothly.
    4. Inside and outside jaws adopt the design of hydr...
3 Jaw Powerful Type Adjustment Steel Body Scroll Chucks
  • Model No:
    KT
  • Product Description:
    1. It's suitable for lathe and grinding machine.
    2. Chuck body is made of steel to enhance safety operations for high speed machining.
    3. The chuck handle can be operated easily and smoothly.
    4. Inside and outside jaws adopt the design of hydr...
4 Jaw Powerful Type Adjustment Steel Body Scroll Chucks
  • Model No:
    FKT
  • Product Description:
    1. It's suitable for lathe and grinding machine.
    2. Chuck body is made of steel to enhance safety operations for high speed machining.
    3. The chuck handle can be operated easily and smoothly.
    4. Inside and outside jaws adopt the design of hydr...
8 Jaw Awl Type Chucks
  • Model No:
    AE
  • Product Description:
    1. It's suitable for CNC tool or cutter grinding machine.
    2. It is particular for polishing drills.
Air Feed Tubes
  • Model No:
    TB
  • Product Description:
    It's suitable for precision CNC lathe and grinding machine.
Air Feed Tubes (For Grinding Machines)
  • Model No:
    TBC
  • Product Description:
    It's suitable for precision CNC lathe and grinding machine.
Soft Jaw For Pull Back Power Chucks
  • Model No:
    S
  • Product Description:
    It's suitable for PL series chucks.
Power Soft Jaws
  • Model No:
    SO
  • Product Description:
    It's suitable for SK series chucks.
Wheel Chucks
  • Model No:
    WTi/US
  • Product Description:
    The WTi fits automobile and light truck wheels 149 to 209, truck and bus wheels up to 24.59. US Series chucks are lightweight for increased spindle life and faster cycle times.
Wheel Chucks
  • Model No:
    LPS
  • Product Description:
    The LPS series for automobiles and light trucks allows for variations in raw castings as well as for new "fashion" wheel designs where material is added to the raw casting for first operation holding.
Chuck Actuators
  • Model No:
    2R120/RNW
  • Product Description:
    Model 2R 120 is a single-motion cylinder ideal for applications that use solid mandrels or spring rings for wheel centering. RNW is a dual-function cylinder that is ideal fpr applications that actuate a collet or a small three-jaw chuck for wheel cen...
2 Actuating Axes Self-centering Solid Air Chuck Fixtures
  • Model No:
    MA
  • Product Description:
    2 actuating axes self-centering solid air chuck fixtures is great for machining center. Two pairs of jaws clamp one after another to assure a workpiece to be locked completely.
    1. Rust-proof for pneumatic cylinder:
    Inside wall of cylinder being r...
3-Jaw Adjustment Steel Body Scroll Chucks
  • Model No:
    3DACT
  • Product Description:
    3-Jaw Adjustment Steel Body Scroll Chucks
Pull Back Power Chuck Fixture
  • Model No:
    PLVE
  • Product Description:
    Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
    1. Rust-proof for Pneumatic Cylinder: Insi...