It’s special for making PET/PETG which is high transparency and chemical resistance. The finished bottles can imitate glass shape and replace some glass bottles without waste during producing and not easy to break.
This series provides higher productivity and quality, suitable for cosmetics and pharmacy. It’s equipped with 4 stations which also breaks the stereotype of IBM and exclusive in Taiwan, improving the traditional blow machine’s shortage.
Machine construction follow the CE marking requirement.
ITEM / MODEL | ||
Screw diameter | mm | 50 |
Injection volume | cm3/shot | 264 |
Injection stroke | mm | 140 |
Plasticizing rate | kg/hr | 30 |
Screw L/D ratio |
| 22 |
Preform clamp | kN | 680 |
Blow mold clamp | kN | 220 |
Press stroke | mm | 180 |
Max. Die. set | mm | 700 x 400 |
Trigger bar | mm | 470 / 550 |
Dry cycle time | sec | 3 |
Hydraulic pressure | bar | 190 |
Oil tank capacity | l | 200 |
Low compressed air | bar | 6~10 |
High compressed air | bar | 20~40 |
Air consumption | l/min | 700 |
Power supply | kW | 45 |
Max. Length | m | 4.6 |
Max. Width | m | 2 |
Max. Height | m | 2.8 |
Total Weight | ton | 10 |