Aus. Linx Technology Co., Ltd.
Taiwan Manufacturers, Exporters.
Detail Information
Description :
1. Support advanced 2x2 MIMO technology with up to 300Mbps downstream and upstream.
2. Complies with 2.4GHz IEEE802.11n and IEEE802.11g/b standards.
3. Low Noise Amplifier (LNA) support.
4. Support 20Mbps and 40Mbps bandwidth.
5. Operation mode: gateway, bridge, wireless ISP.
6. Wireless mode: AP, Client, WDS, AP+WDS.
7. DHCP server/client.
8. RF output power adjustable.
9. Virtual DMZ, port forwarding.
10. Dynamic DNS.
11. TCP/UDP/ICMP/ARP protocol stack.
12. Firewall, URL/IP/Port/MAC filtering.
13. Wireless users access control.
14. Multiple SSID.
15. NTP client.
16. Wireless security–64/128bit WEP, WPA TKIP, WPA2 AE2, 802.1x.
17. Support PPPoE, VPN pass-through(PPTP and L2TP).
18. QoS enhancement–WMM.
19. Support Microsoft LLTD(Link Layer Topology Discovery) protocol.
20. Support Microsoft Vista Basic logo for wireless router.
21. WPS(Wi-Fi Protected Setup) via PIN and PBC.
22. Easy quick setup wizard with web-based utility.
23. Two detachable antennas.
Specification :
1. Standard: IEEE 802.11n; IEEE 802.11g/b. 2. RF output power(typical): (1)802.11b: up to 19±1dBm. (2)802.11g: up to 16±1dBm. (3)802.11n: up to 15±1dBm. 3. Frequency band: 2.400~2.4835GHz. 4. Sensitivity: (1)-70dBm@150Mbps (2)-71dBm@54Mbps (3)-87dBm@11Mbp (4)-92dBm@5.5Mbps (5)-65dBm@1Mbp. 5. Data rate: (1)802.11n(40MHz): up to 300Mbps. (2)802.11n(20MHz): up to 150Mbps. (3)802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps. 6. Access protocol: CSMA/CA. 7. Dimension(mm): 149(L) x 104(W) x 25(H). 8. Number of operation channel: U.S. 1-11, Japan 1-13,14, ETSI 1-13. 9. Humidity: 10%~90% (non-condensing). 10. Wireless mode: AP, Client, WDS + AP, WDS. 11. Operation temperature operation: 0°C~60°C. 12. Security: 64/128bit WEP WPA(TKIP with IEEE 802.1x) WPA2(AES with IEEE 802.1x WPA2-mixed. 13. Connector: two antenna connector, WPS button, One RJ-45 port for WAN. Four 10/100Mbps RJ-45 LAN ports, reset to default button. Power jac. 14. Operation mode: gateway, bridge, wireless ISP. 15. Power requirement: DC 12V/1A.
Aus. Linx Technology Co., Ltd.
- Taiwan