Description :

1. Power supply leads should be thicker than 0.75mm.
2. Variable speed ranges from 90-1400rpm at 50Hz, and 90-1700rpm at 60Hz.

Specification :

1. Due to the construction of the gear motor, please reverse the CW/CCW wires when you wish to switch to an opposite rotational direction.
2. The STOP and RUN switches are not for power source, but are to be used for short-interval stops only. If the motor must be stopped for a longer period, please turn off the power supply.
3. Please refer to the attachment.

• 
  Separated Type Speed Controllers