1. Equipped with cooling system.
2.Slideways are hardened, precision ground.
3.All castings are FC25 high quality material, anneal treated to relieve internal stress.
4.Centralized control panel minimizes operation fatigue while permitting efficient operation.
5.The spindle runs on precision bearings for long term high speed running, heavy duty cuttting and maximum stability. ( for model 0VS, 0EVS series ).
6.The gears are hardened and precision ground. ( for model 0VS, 0EVS series ).
7.Belt drive milling head.
8.Milling Head can tilt 90 degree right and left.
9.Spindle speed change with inverter which design is easy to change speed. (For 0EVS)
10.Machine base, stand and table are made by MEEHANITE Cast Iron construction.
11.Table Power Feed for X, Y axis are optional equipment.
|Drilling Capacity in Cast Iron||OD-18mm|
|Drilling Capacity in Steel||OD-15mm|
|Capacity face milling||OD-75mm/2.5mm|
|Capacity end milling||OD-20mm/6mm|
|Spindle Taper||R8/NT- 30|
|Diameter of Quill||85mm|
|Number of Spindle Speeds||Variable (INVERTER)|
|Range of Spindle Speeds (50HZ)||0-4,500 rpm|
|Range of Spindle Speeds (60HZ)||0-4,500 rpm|
|Power Down Feed per Revolutions of Spindle||0.04/0.08/0.15mm/rev.|
|Number of Power Feeds||3|
|Head Movement (L to R)||90 degrees|
|Max. Distance Spindle to Table||50-356mm|
|Max. Distance Spindle to Column||400mm|
|Min. Distance Spindle to Column||134mm|
|Size of Table||200mmx910mm|
|Longitudinal Table Travel / X-Axis||640mm|
|Cross Table Travel / Y-Axis||240mm|
|Number of T-Slots||3|
|Max. Weight of Workpiece||250kg|
|Travel of Knee||355mm|
|Overall Dimensions Wx Dx H||1400x1320x2100mm|
|Horse Power for Main Motor||2.2kw (3HP)|
|Shipping Weight (approx.)||850kg|
|Control Switch Box w/Rotary Arm|
|With Chip Tray on Base|
|Coolant Pump System|
|Levels and pads included|
|24V Work Lamp System|
|Air Power Draw Bar|
|CE Spindle Guard Accessory|
|X axis table power feeder|
|Turcide-B for X/Y axis movement.|