•Adopts mechanic switch with forward/ reverse functions and longer service life with low damage.
•The arm is made of high-class cast-iron. Arm slide is under strick heat-treatment and grinding.
•2HP motor can provide diverse speed selection under heavy-duty cutting.
•The main spindle is balanced by special spring. And is more durable than all traditional balance mechanism.
•The over-load protective devices can secure the operator against injury.
• Extra auxiliary dial for spindle feed depth indication. With this indicator, we can review the momental feed depth of spindle 1through 210mm at any moment.
|Distance from column surface to spindle center , Max||1100|
|Distance from column surface to spindle center , Min||280|
|Travel of spindle head||820|
|Distance from base surface to spindle end , Max||1270|
|Distance from base surface to spindle end , Min||470|
|Elevating height of Arm||570|
|Effective area of box table||635x520x415|
|Dimension of base||1725x715x180|
|Taper hole spindle||MT#4|
|Stroke of spindle||230|
|R.P.M of spindle (rpm x steps)||44-1500x12 steps|
|Feed of spindle (rev. x steps)||0.05, 0.09, 0.15x3 steps|
|Main motor (HP)||3HP|
|Elevating motor (HP)||1HP|
|Coolant equipment (HP)||1/8HP|
|Machine height from floor (Max.)||2530|
|Base + column height||2000|
|Net weight (approx)kgs||1800|
|Shipping weight (approx)kgs||1950|
|Shipping dimensions (LxWxH)||1880x864x2210|
Cutting Capacity :
|Steel||42mm (1 2/3")|
|Cast iron||55mm (2 3/16")|
|Cast iron||35mm (1 1/2 ")|