•Equipped with cooling system.
•Slideways are hardened, precision ground, then coated with TURCITE-B for maximum wear resistance.
•All castings are FC25 high quality material, anneal treated to relieve internal stress.
•Oversize column ensures maximum rigidity and stability widely spaced base structure.
•Centralized control panel minimizes operation fatigue while permitting efficient operation.
•The spindle runs on precision bearings for long term high speed running, heavy duty cutting
and maximum stability. •The X and Y axes are transmitted by precision screws. Combined with preloaded double nuts for
extremely smooth ,high precision working and minimum backlash. •The gears are hardened and precision ground.
•Belt drive milling head.
•Milling Head can tilt 90 degree right and left; 45 degree back and forward.
•Spindle speed change with inverter which design is easy to change speed. (For 3EVS)
•Machine base, stand and table are made by MEEHANITE Cast Iron construction.
•Automatic Lubrication System is optional.
•Table Power Feed for X, Y axis are optional equipment.
|Drilling Capacity in Cast Iron||OD-18mm|
|Drilling Capacity in Steel||OD-15mm|
|Capacity face milling||OD-75mm/2.5mm|
|Capacity end milling||OD-20mm/6mm|
|Spindle Taper||R8/NT- 30|
|Diameter of Quill||85mm|
|Number of Spindle Speeds||Variable (INVERTER)|
|Range of Spindle Speeds (50HZ)||0-4,500 rpm|
|Range of Spindle Speeds (60HZ)||0-4,500 rpm|
|Power Down Feed per Revolutions of Spindle||0.04/0.08/0.15mm/rev.|
|Number of Power Feeds||3|
|Head Movement (L to R)||90 degrees|
|Head Tilt||45 degrees|
|Max. Distance Spindle to Table||50-400mm|
|Max. Distance Spindle to Column||630mm|
|Min. Distance Spindle to Column||250mm|
|Size of Table||252mmx1115mm|
|Longitudinal Table Travel / X-Axis||600mm|
|Cross Table Travel / Y-Axis||380mm|
|Number of T-Slots||3|
|Max. Weight of Workpiece||380kg|
|Travel of Knee||406mm|
|Overall Dimensions Wx Dx H||1570x1560x2200mm|
|Horse Power for Main Motor||2.2kw (3HP)|
|Shipping Weight (approx.)||1262kg|
|Control Switch Box w/Rotary Arm|
|With Chip Tray on Base|
|Coolant Pump System|
|Levels and pads included|
|24V Work Lamp System|
|Turcide-B for X/Y axis movement.|
|Air Power Draw Bar|
|CE Spindle Guard Accessory|
|X axis table power feeder|