Major Science

Major Science, the leading lab instrument manufacturer.


Dry Heating Lab Fermentor (Single Wall With Heating Base Unit)


  • Model No: FS02-V-D
  • Factory Location: Taiwan
  • Sample Request: No
  • Target Markets: Worldwide

Detail Information

Description :

The single wall plain bottom vessel is an ideal instrument for your routine culture or educational purposes. Durable stainless steel supporting rods and bottom plate are designed to withstand most heavy usage. Fast cooling and heating is achieved through the inner cooling coil and heating base unit.

Specification :

Vessel Working volume  (Liter) 3L 5L 7L 10L
 Total volume (Liter) 3.7 6.5 9.1 13.0
 Material  Borosilicate glass / 316L stainless steel for headplate and all fittings
 Control Unit Control panel 10.4" Colorful touch-screen interface
 Communication  port Remote control through Ethernet
 Data export through USB port
 RS-485 port for system extension
 Program storage Up to 59,994 process programs
 Log data storage Up to 100 process monitoring data files
 Cabinet material ABS front panel and painted iron housing
 Dimension Footprint: W x D = 15.75" x 19.69", (400 x 500 mm)
 Height = 29.13", (740 mm)
 Rated voltage 110V ~/220V~ ; 50-60 Hz
 Aeration Inlet gas flow-meter 0, 1-10 LPM 0, 2-20 LPM
 Sparger Orifice ring
 Baffle Removable 316L stainless steel baffles
 Temperature Heating Bottom heating plate (Base unit)
 Cooling Cooling coil
 Range 5°C (41°F) above coolant up to 90°C (194°F)
 Resolution 0.1°C
 Probe Platinum RTD probe (Pt 100)
 Control mode Manual or Programmable 15 steps PID control
 Agitation Drive Removable top brushless motor
 Speed range Two agitation motor ranges:
 For fermentation and cell culture: 30 - 1,000 rpm (10L); 30 - 1,200 rpm (3~7L)
 Resolution 1 rpm increment
 Impeller 3 adjustable Rushton-type impellers
 Control mode Manual or Programmable 15 steps PID control
 pH Range 2 -14 pH
 Resolution 0.01 pH
 Probe Gel-filled electrode; Autoclavable
 Control mode Manual/ Acid Start/ Programmable 15 steps PID control
 DO Range 0 - 200%
 Resolution 0.1%
 Probe Polarographic DO sensor; Autoclavable
 Control mode 2-stage DO cascade response: (operate under manual or process mode)
 a. Increase or decrease agitation speed
 b. Oxygen enrichment module (optional device required)
 c. Gas Mixing Station module (optional device required)
 Substrate feeding strategy
 Measurement range -/+ 2000mV
 Resolution 1 mV
 Probe Gel-filled electrode; Autoclavable 
 Foam Probe 316L stainless steel protector with insulated telfon tube;
 On/Off control
 Peristaltic  pump Pump number 4 Built-in pumps; One external pump (optional device required)
 Motor type Precise stepping motor; minimum speed is 1 rpm
 Speed range 0 - 65 rpm
 Resolution 1 rpm
 Control mode Manual or Programmable 15 steps feeding control;
 Pump can be assigned for Acid, Base, Antifoam and Substrates
 Exhaust Device type 316L stainless steel condenser
 Utility  requirement Power Source 100-120V~50-60Hz or 210-230V~50-60Hz with electrical safety cutoff switch
 Water Source 2 Bar maximum (29 psi); water supplied to fermenter must be at least 15°C below set point  operatin temperature
 Air Source 1 Bar maximum, must be dry, oil-free and filtered
 For 3-5L, minimum pressure 0.1499 kg/cm2 and air flow rate 60L/min 
 For 7-10L, minimum pressure 7.0 kg/cm2 and air flow rate 120L/min
 Sterilization Autoclave; size of autoclave inner chamber must be able to accomdate vessel with attached  condenser

Features :

1. Durable vessel design for the routine and heavy duty jobs
2. Color touch screen and graphical user interface for easy operation
3. Real-time trend data recording ensures best fermentation performance
4. 2-stage DO cascade for precise DO (dissolved oxygen) level control
5. Ethernet remote control ability allows you navigate and operate your fermentation process from desktop
6. No additional software required
7. Low voltage DC brushless motor
8. Quick connectors for easy operation
9. 4 built-in assignable and programmable peristaltic pump for automatic pH, antifoam and feeding control
10. Wider temperature control range, up to 90°C (194°F)
11. Automatic process allows you to set up your 15 steps programmable control
12. Manual process allows you to run individual parameters independentlyFull accessories are offered as a standard package
13. Large inoculation port for easy access
14. Full accessories are offered as a standard package

Major Science

  • Taiwan