Wado Electrical Engineering Co., Ltd

Taiwan Manufacturers, Exporters.

All Products

Automatic Double-Flyer Armature Winding Machine
  • Model No:
    WA-150
  • Product Description:
    WA-150 takes conductors from two separate reels of wire simultaneously to wind two slots together. Once would with the correct number of turns and connected to the respective commutator hook, the armature is indexed automatically to the next pair of ...
Automatic Double-Flyer Armature Winding Machine
  • Model No:
    WA-151
  • Product Description:
    WA-151 takes conductors from two seprate reels of wire simultaneously to wind two slots together. Once wound with the correct number of turns and connected to the respective commutator hook, the armature is indexed automatically to the next pair of s...
Coil Winding Machine
  • Model No:
    WS-120
  • Product Description:
    This equipment is automatic coil winding machine in which simultaneously winding 24 coils at one time.
    Copper wire will be putted in tooling by operator -> control by induction motor -> winding -> completion.
Automatic Double Spindle Stator Winding Machine
  • Model No:
    WS-420
  • Product Description:
    This machine is automatic inner winding 2 pole stator. Operator put stator on tooling -> control by induction motor -> winding -> completion. Equipped with induction motor and multi-angle transmission device with auto-lubrication via PLC con...
Shaft Placing Machine (servo)
  • Model No:
    WPS-501SA
  • Product Description:
    This machine is an automatic device used to inserting. Shaft into the Lamination. This is fully automatic load the lamination and shaft from the material through into tooling. Via conveyor to working area. Machine starts to loading -> postion ->...
4.6.8 Pole Stator Winding Machine
  • Model No:
    WS-1468S
  • Product Description:
    This machine is automatic inner winding 4, 6, 8 pole stator. Operator put stator on tooling -> control by servo motor -> winding -> completion.
Automatic Multi-poles Stator Winding Machine
  • Model No:
    WS-286G
  • Product Description:
    The machine is device for automatic winding mutipole of stator. Operator put stator on tooling -> control by servo motor -> rotating -> arraying -> winding -> automatic cutting -> completion.
Automatic Commutator Turning Machine
  • Model No:
    WT-180
  • Product Description:
    * This machine is an automatic device used cutter to turning commutator dia.
    * The armature put on the V-block by operator.
    * The belt device goes downward to oppress the lamination, then start turning.
    * And the machine will automatic cutter forw...
Automatic Double-Flyer Armature Winding Machine
  • Model No:
    WA-154
  • Product Description:
    This machine is control by PLC. Through the Servo motor – rotating / fix position / hooking / winding. It is automatic cutting and suit for general armature--- hooking commutator. The operator just put the armature into the chuck mechanism....
Armature Testing Machine
  • Model No:
    WTA-380
  • Product Description:
    The armature put on the tooling. Then, start to testing. The belt will press down to rotating the limanation. The probe will hold the armature to start the testing until completion. Operate the auto test according to the following procedure: Surge Te...
Commutator Fusing Machine
  • Model No:
    WF-122
  • Product Description:
    * This machine is a device used to welding / fusing the copper wire which is hooked in the bar of commutator.
    * Operator put the armature on the tooling, push into the chuck in standing.
    * After push start button, the chuck will clip the shaft tigh...
Automatic Commutator Fusing Machine
  • Model No:
    WF-125A
  • Product Description:
    This machine is for fusing the commutator. It could save time by double fusing.

    MAIN CONSTRUCTION:
    1. Indexing device by air cylinder.
    2. Fusing force device.
    3. Double fusing device.
    4. Exhaust fume emission device.
    5. 2 sets of programmable...