Description :

This machine is control by PLC. Through the Servo motor – rotating / fix position / hooking / winding. It is automatic cutting and suit for general armature--- hooking commutator. The operator just put the armature into the chuck mechanism. Then, push the start button. The machine will work automatically and no need to cut the wire.

Specification :

The below is subject to change without notice.

Wire diameter	a. 0.12～0.3㎜ b. 0.3～1.0 ㎜
Motor speed	3000 R.P.M.
Armature diameter	20～90㎜
Controller	PLC Control system
Armature stack height	20～90㎜
Wire tension	electric powder brake
Commutator diameter	15～40㎜
Air pressure	4～6㎏/cm2
Numbers of slots	6～36slots
Motor	AC servo motor （3sets）
Hooking way	Alpha & U Type
Power supply	AC 3 ψ220V/380V 50/60HZ
Direction	CW or CCW
Dimensio	900L×1100W（加线架寬1740）×1500H
Numbers of turns	0～9999 turns
Weight	750KG
Commutator type	Hook

Features :

1. The latest technology for high effective and fast changeover.
2. 100 memory parameter setting for different type armature. Password setting can avoid the type setting change easily.
3. Special winding and hooking can be set. Ex. different winding turn in each slot, hooking change.
4. I/O test can be done from Touch screen. It is convenience for daily check.
5. Electric powder brake is separated with 5 ranges of tension for different winding and hooking.
6. WA-154 can arrange with fully automatic load/unload. Operator can handle several machines at same time. It increase production efficiency and save labor cost.
7. Easy and fast fixture changing.

• 
  Shaft Placing Machine (servo)
• 
  4.6.8 Pole Stator Winding Machine
• 
  Automatic Multi-poles Stator Winding Machine
• 
  Automatic Commutator Turning Machine
• 
  Commutator Fusing Machine
• 
  Automatic Double Spindle Stator Winding Machine
• 
  Automatic Double-Flyer Armature Winding Machine
• 
  Automatic Double-Flyer Armature Winding Machine

More