This machine is for fusing the commutator. It could save time by double fusing.
MAIN CONSTRUCTION:
1. Indexing device by air cylinder.
2. Fusing force device.
3. Double fusing device.
4. Exhaust fume emission device.
5. 2 sets of programmable controller.
6. Microcomputer welding controller. (Made in Japan)
7. Water-cooling recycle device.
8. Touch screen.
The below is subject to change without notice.
Wire diameter | A.(ψ0.3-ψ0.8 mm MAX) B.(ψ0.8-ψ1.00㎜ MAX) |
Controller | PLC |
Armature diameter | 20~80㎜ |
Power supply | AC 3 φ380V ±10% |
Commutator diameter | 10~50㎜ |
Air pressure | 4~6㎏/cm2 |
Bars of commutator | 48 Max. |
Dimension | 1000L×1620W×1750H |
Shaft diameter | 4~20㎜ |
Weight | 750KG |
Capacity | 2 Fusing Head |
* Stable fusing being suitable for mass production.
* The quantity & welding electrode can be setting. The alarm will on when reach the quantity.
* The temperature control by Electrode cooling system. The machine will stop when reach temperature.
* 30 sets memory parameter. Using the password to avoid falsifying.
* The Single welding or twin welding can be select.
* Easy and fast fixture changing.
* Automatic move the faulty welding armature to non-pass area.