657675369

Autogrip Machinery Co., Ltd.

Taiwan Manufacturers, Exporters.

All Products

Chuck Adaptors Parts / Accessories
  • Model No:
    FL
  • Product Description:
    Product Name: Chuck Adapters.
Expansible Pull Lock Special Purpose Power Chucks
  • Model No:
    3E
  • Product Description:
    Expansible Pull Lock Power Chuck:
    1.Suitable for internal gripping
    2.Radial clamp and axial pull down at the same time, keep the workpiece attaching close to the base surface of the chuck.
    3.Almost no workpiece uplifting displacement.
    4.With high...
Thru-Hole Rotary Cylinders
  • Model No:
    TK
  • Product Description:
    Short type Thru-Hole Rotary Hydraulic Cylinder with Safety Device:
    1.Super short form, light weight large Through-Hole, just as 2/3 of typical model length.
    2.Built-in safety check valves and pressure relief valves.
    3.Can screw it from the rear en...
Collant Collector Rotary Cylinders
  • Model No:
    CT
  • Product Description:
    Product Name: Coolant Collector with Stroke Control.
Long Jaw StrokePower Chuck
  • Model No:
    2L/2L-A
  • Product Description:
    CRANK type 2-Jaw Extra Long Jaw Stroke Thru-Hole Power Chuck:
    1. It's a CRANK type 2-jaw with the large through-hole, and extra long jaw stroke.
    2. Matching surfaces of all parts hardened, ground and lubricated directly.
    3. Construction of hig...
T-Nut Parts / Accessories
  • Model No:
    T-Nut
  • Product Description:
    Product Name: T-Nut.
Long Jaw Stroke Power Chuck
  • Model No:
    3M
  • Product Description:
    1.It's a WEDGE-HOOK type 3-jaw power chuck, and extra long jaw stroke.
    2.Matching surfaces of all parts hardened, ground and lubricated directly.
    3.Construction of high rigidity and high clamping accuracy.
Spring Collet Collet Chucks
  • Model No:
    DIN-6343
  • Product Description:
    Product Name: Steel Collets.
End Stop Collet Chucks
  • Model No:
    CBE
  • Product Description:
    End stop Collet Chuck:
    1.End stop clamping.
    2.With backgauge block mechanism, positioning and the length control of the workpiece can be more precise.
    3.Backgauge block and cover are interchangeable. The chip-proof function can also be achieved.
Dead Length Collet Chucks
  • Model No:
    CBD
  • Product Description:
    DL-Dead Length Collet Chuck:
    1.Clamping push with the backgauge block mechanism, collet will not be pushed, can precise positioning for workpiece length, make the precision of the length control more precise.
    2.Match Autogrip Rubber collet, clampin...
Double-Slide Facing Heads
  • Model No:
    FD
  • Product Description:
    Double Slide Facing Head:
    1.Feed mechanism is transmitted by Crank or Helical Gear Rack, with steady feed speed. Simple adjustment for feed speed and stroke.
    2.Matching surfaces of all parts hardened, grounding and lubricated directly. With rigidit...
Single-Slide Facing Heads
  • Model No:
    FA
  • Product Description:
    Single Slide Facing Head:
    1.Feed mechanism is transmitted by Rack and Pinion or Wedge Plunger, with steady feed speed. Simple adjustment for feed speed and stroke.
    2.Matching surfaces of all parts hardened, grounding and lubricated directly. With r...
Crank Type Synchronous Clamps
  • Model No:
    CP
  • Product Description:
    Crank Type Synchronous Clamps:
    1.It's a CRANK type 2-jaw synchronous clamp with long jaw stroke.
    2.Matching surfaces of all parts hardened, ground and lubricated directly.
    3.Construction of high rigidity and high clamping accuracy.
Power Indexing Chuck Special Purpose Power Chucks
  • Model No:
    IS
  • Product Description:
    Power Indexing Chuck:
    1.Indexing operates during the spindle rotation, can perform a quick change between multiple working axles.
    2.Chuck of all parts hardened, ground and lubricated directly.
    3.Sealed against swarf, chips and coolant.
    4.Construc...
Quick Jaw-Change Special Purpose Power Chucks
  • Model No:
    3Q
  • Product Description:
    Quick Jaw-Change Chuck:
    1.The shortest changes time for soft jaw, it is the high repeatability precision.
    2.Chuck of all parts hardened, ground and lubricated directly.
    3.Construction of high rigidity and high clamping accuracy.
    4.For safety syst...
Rubber Grip Collet Chucks
  • Model No:
    RG
  • Product Description:
    *It is a rubber grip collet for push type or draw type collet chucks.
    *Full griping area: high rigidity, more gripping force. Gripping smoothly: prevent to damage the workpiece.
    *More accurate than standard spring collets. Accuracy: With customized...
Finger Type Special Purpose Power Chucks
  • Model No:
    2J
  • Product Description:
    Finger Power Chuck:
    1.Gripping at the end face and preventing deformation of workpiece.
    2.Suitable for thin wall workpiece processing.
    3.The gripping compensating mechanism can grasp the irregular surface workpieces well.
    4.Air-tight pressure det...
Finger Type Special Purpose Power Chucks
  • Model No:
    3J
  • Product Description:
    Finger Power Chuck:
    1.Gripping at the end face and preventing deformation of workpiece.
    2.Suitable for thin wall workpiece processing.
    3.The gripping compensating mechanism can grasp the irregular surface workpieces well.
    4.Air-tight pressure det...
Thru-Hole Rotary Cylinders
  • Model No:
    TH
  • Product Description:
    Thru-Hole Rotary Hydraulic Cylinder with Safety Device:
    1.Super high speed, light weight large Through-Hole.
    2.Built-in check valve which prevents the internal pressure from sudden declining so that the workpiece will not fly out and cause a seriou...
Pull Lock Stationary Chucks
  • Model No:
    SU
  • Product Description:
    Stationary Pull Lock Chuck:
    1.Build-in hydraulic cylinder; it can also work with lock valve and be driven by air pressure.
    2.Radial clamp and axial pull down at the same time, keep the workpiece attaching close to the base surface of the chuck.
    3....
Pull Back Stationary Chucks
  • Model No:
    SD
  • Product Description:
    Stationary Pull Back Chuck:
    1.Build-in hydraulic cylinder; it can also work with lock valve and be driven by air pressure.
    2.Radial clamp and axial pull down at the same time, keep the workpiece attaching close to the base surface of the chuck.
    3....
Pull Back Stationary Chucks
  • Model No:
    SE
  • Product Description:
    Stationary Pull Back Chuck For Internal Gripping:
    1.Build-in hydraulic cylinder; it can also work with lock valve and be driven by air pressure.
    2.For internal grapping
    3.With high precision and stability.
    4.Suitable for the precision large lengt...
Pull Lock Special Purpose Power Chucks
  • Model No:
    2D
  • Product Description:
    Pull Lock Power Chuck:
    1.Radial clamp and axial pull down at the same time, keep the workpiece attaching close to the base surface of the chuck.
    2.Almost no workpiece uplifting displacement.
    3.The body and the cylinder pull-down mechanism are heat...
Pull Lock Special Purpose Power Chucks
  • Model No:
    3U/3U-K
  • Product Description:
    Pull Lock Power Chuck
    1.3U: It's a Pin-Arbor Draw Down type 3-jaw thru-hole power chuck.
    2.3U-K: It's a Pin-Arbor Draw Down type 3-jaw non-thru-hole power chuck.
    3.High radial gripping force and high accuracy.
    4.Suitable for heavy machini...
Standard Hard Jaws Parts / Accessories
  • Model No:
    HJ
  • Product Description:
    Product Name: Standard Hard Jaws.
Non-Thru-Hole Rotary Cylinders
  • Model No:
    RH
  • Product Description:
    Rotary Hydraulic Cylinder:
    1.The rotary valve and cylinder body, all made of special light alloy, light-weight.
    2.Through unique design, the rotary valve enables the inside bearing to get sufficient lubricating and cooling and endure high-speed rot...
High Speed Non-Thru-Hole Power Chuck
  • Model No:
    3P/3P-A
  • Product Description:
    WEDGE-HOOK type 3-Jaw Power Chuck:
    1.It's a WEDGE-HOOK type 3-jaw power chuck.
    2.Matching surfaces of all parts hardened, ground and lubricated directly.
    3.Construction of high rigidity and high clamping accuracy.
    4.3P-03:It's a WEDGE-HOO...
Large Thru-Hole Power Chuck
  • Model No:
    3HB
  • Product Description:
    WEDGE-HOOK type 3-Jaw Extra Thru-Hole Power Chuck:
    1.It's a WEDGE-HOOK type 3-jaw with the extra large through-hole.
    2.Matching surfaces of all parts hardened, ground and lubricated directly.
    3.Construction of high rigidity and high clamping a...
High Speed Thru-Hole Power Chuck
  • Model No:
    3H/3HA
  • Product Description:
    WEDGE-HOOK type 3-Jaw Thru-Hole Power Chuck:
    1. It's a WEDGE-HOOK type 3-jaw with the large through-hole.
    2. Matching surfaces of all parts hardened, ground and lubricated directly.
    3. Construction of high rigidity and high clamping accuracy.
    ...
Non-Thru-Hole Rotary Cylinders
  • Model No:
    RK
  • Product Description:
    Short type Rotary Hydraulic Cylinder with Safety Device:
    1.For short form, light weight and high speed rotary cylinder.
    2.Built-in safety check valves and pressure relief valves.
    3.Can screw it from the rear end of the cylinder when mounting.
    4.T...
Coolant Connection Rotary Cylinders
  • Model No:
    RL
  • Product Description:
    Short type Rotary Hydraulic Cylinder with Coolant Connection and Safety Device:
    1.To allow coolant to be feed from the rear end of the distributor through the rotating union
    2.Built-in safety check valves and pressure relief valves.
    3.The drain po...
Compact Style Rotary Cylinders
  • Model No:
    RE
  • Product Description:
    Compact style Rotary Hydraulic Cylinder with Stroke Control and Safety Device:

    1.For short form, light weight and high speed rotary cylinder,suitable for vertical lathe.
    2.Built-in safety check valves, pressure relief valves and proximity sensor....
Double Rod Rotary Cylinders
  • Model No:
    RD-N
  • Product Description:
    Double-rod Rotary Hydraulic Cylinder:

    1.For short form, light weight, double rod rotary cylinder.
    2.The drain port should be independently connected to oil tank to avoid back pressure.
Non-Thru-Hole Rotary Cylinders
  • Model No:
    RA
  • Product Description:
    Rotary Air Cylinder:
    1.The rotary valve and cylinder body, all made of special light alloy, are light-weight.
    2.Through unique design, the rotary valve can considerably reduce the waste in compressing air and efficiently increase its utilization.
    ...
High Speed Thru-Hole Power Chuck
  • Model No:
    4H/4HA
  • Product Description:
    WEDGE-HOOK type 4-Jaw Thru-Hole Power Chuck:
    1. It's a WEDGE-HOOK type 4-jaw with the large through-hole.
    2. Matching surfaces of all parts hardened, ground and lubricated directly.
    3. Construction of high rigidity and high clamping accuracy.
    ...
Long Stroke Special Purpose Power Chucks
  • Model No:
    1L
  • Product Description:
    Extra Long Jaw Stroke Power Chuck:
    1.It's a CRANK type single-jaw with the large through-hole, and extra long jaw stroke.
    2.Suitable for clamping the jig or irregular work piece.
    3.Construction of high rigidity and high clamping accuracy.
Long Jaw Stroke Power Chuck
  • Model No:
    2M
  • Product Description:
    1.It's a WEDGE-HOOK type 2-jaw power chuck, and extra long jaw stroke.
    2.Matching surfaces of all parts hardened, ground and lubricated directly.
    3.Construction of high rigidity and high clamping accuracy.
Collet Chuck
  • Model No:
    CL
  • Product Description:
    Collet Chuck:
    1.It's a PUSH type collet used mainly on turning, CNC, special purpose machines, ect.
    2.High clamping accuracy, high speed and construction of high rigidity.
    3.The installation is the same as “Thru-hole power chuck” and they are ...
High Speed Thru-Hole Power Chuck
  • Model No:
    2H/2H-A
  • Product Description:
    WEDGE-HOOK type 2-Jaw Thru-Hole Power Chuck:
    1.It's a WEDGE-HOOK type 2-jaw with the large through-hole.
    2.Matching surfaces of all parts hardened, ground and lubricated directly.
    3.Construction of high rigidity and high clamping accuracy.
    4....
High Speed Non-Thru-Hole Power Chuck
  • Model No:
    2P/2P-A
  • Product Description:
    Product: WEDGE-HOOK type 2-Jaw Power Chuck
Four-Jaw Two Motions Special Purpose Power Chucks
  • Model No:
    4T
  • Product Description:
    Four-Jaw Two Motion Type Power Chuck:
    1.It's a CRANK type with two pairs of 2 jaws self center independent of each other.
    2.The 4T series is suitable for square bar and other nonuniform shaped workpieces.
    3.Patent numbers :
    Taiwan : PAT.M359...
Inclined Master Jaw Special Purpose Power Chucks
  • Model No:
    3N
  • Product Description:
    Inclined Master Jaws Power Chuck:
    1.The surface of the center through cover is grinding treated, it can be the position base surface of the jig/workpiece.
    2.The slideway of main jaws is inclined. It improves the clamping force and reduces the upflo...
Collet Chuck
  • Model No:
    CL-A
  • Product Description:
    Collet Chuck:
    1.It's a PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
    2.High clamping accuracy, high speed and construction of high rigidity.
    3.The installation is the same as “Thru-hole power chuck” and they are...
Coolant Connection Rotary Cylinders
  • Model No:
    RL-N
  • Product Description:
    Short type Rotary Hydraulic Cylinder with Coolant Connection:
    1.To allow coolant to be feed from the rear end of the distributor through the rotating union.
    2.Can screw it from the rear end of the cylinder when mounting.
    3.The drain port should be...
Air Connection Rotary Cylinders
  • Model No:
    RL-AN
  • Product Description:
    Short type Rotary Hydraulic Cylinder with Air Connection:
    1.To allow compressed air to be feed from the rear end of the distributor through the rotating union.
    2.Can screw it from the rear end of the cylinder when mounting.
    3.When used, a little o...
Compact Style Rotary Cylinders
  • Model No:
    RE-A
  • Product Description:
    Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device:

    1.For short form, light weight and high speed rotary cylinder. To allow compressed air to be feed from the rear end of the distributor through the rotating union, suita...
Double Rod Rotary Cylinders
  • Model No:
    RD
  • Product Description:
    Double-rod Rotary Hydraulic Cylinder with Safety Device:

    1.For short form, light weight, double rod rotary cylinder.
    2.Built-in safety check valves and pressure relief valves.
    3.The drain port should be independently connected to oil tank to avo...
For Gear Machine Rotary Cylinders
  • Model No:
    RG
  • Product Description:
    Rotating Hydraulic Cylinder for Gear Machines:

    1.The rotary valve and cylinder body, all made of special light alloy, light-weight. suitable for gear machines.
    2.Through unique design, the rotary valve enables the inside bearing to get sufficient...
Stroke Control Rotary Cylinders
  • Model No:
    RS-N
  • Product Description:
    Short type Rotary Hydraulic Cylinder with Stroke Control:
    1.For short form, high speed and stroke control.
    2.With proximity sensor , the movement of the position is easy to adjust and confirm when operating.
    3.Can screw it from the rear end of th...
Stroke Control Rotary Cylinders
  • Model No:
    RS
  • Product Description:
    Short type Rotary Hydraulic Cylinder with Stroke Control and Safety Device:
    1.For short form, high speed and stroke control.
    2.With proximity sensor , the movement of the position is easy to adjust and confirm when operating.
    3.Built-in safety ch...
Non-Thru-Hole Stationary Chuck
  • Model No:
    VP
  • Product Description:
    Non-Thru-Hole Stationary 2/3-Jaw Power Chuck:
    1.It's a STATIONARY CHUCK with two or three jaws for drilling, milling and other machines.
    2.Specification and size of matching chuck for model VP-200 is the same as model 2P.
    3.Specification and ...
Thru-Hole Stationary Chuck
  • Model No:
    VH
  • Product Description:
    Thru-Hole Stationary 2/3-Jaw Power Chuck:
    1.It's a STATIONARY CHUCK with two or three jaws for drilling, milling and other machines.
    2.Specification and size of matching chuck for model VH-200 is the same as model 2H.
    3.Specification and siz...
Draw Collet Chucks
  • Model No:
    CB/CB-A
  • Product Description:
    Draw Collet Chucks:
    1.It's a DRAW type collet used mainly on turning, CNC, special purpose machines , ect.
    2.High clamping accuracy, high speed and construction of high rigidity.
    3.The installation is the same as “Thru-hole power chuck” and th...
Large Thru-Hole Air Chuck Special Purpose Power Chucks
  • Model No:
    AP
  • Product Description:
    Large Thru-Hole Air Chuck:
    1.Large through-hole 3-jaw power chuck with build in air cylinder.
    2.With build-in “pressure detection” device in chuck which can check the pressure is lowered rapidly within the chuck, guarantee to the security of operat...
For Vertical Lathe Power Chuck
  • Model No:
    3V-A
  • Product Description:
    Power Chuck for Vertical Lathe:
    1. It's a WEDGE-HOOK type 3-jaw high speed power chuck.
    2. Sealed against swarf, chips and coolant, suitable for vertical lathe.
Hydraulic Rotary Valve / Rotary Joint
  • Model No:
    RV
  • Product Description:
    Hydraulic Rotary Valve:

    1.Rotary valve is used for clamping cylinder on rotary table.
    2.Through unique design, it can make the rotary housing be rotated light force, and is free from oil leaking.
    3.I Type is a single circuit which controls the c...
Air Rotary Valve / Rotary Joint
  • Model No:
    RV-A
  • Product Description:
    Air Rotary Valve:

    1.Rotary valve is used for clamping cylinder on rotary table.
    2.Through unique design, it can make the rotary housing be rotated light force, and is free from oil leaking.
    3.I Type is a single circuit which controls the clampin...
Switch Valves Parts / Accessories
  • Model No:
    VH-201
  • Product Description:
    Product Name: Switch valve.
Latching Valves Parts / Accessories
  • Model No:
    FV-01
  • Product Description:
    Latching Valves:
    FV-01 is for air stationary chuck.
Standard Soft Jaws Parts / Accessories
  • Model No:
    SJ
  • Product Description:
    Product Name: Standard Soft Jaws.
Coolant Rotary Valve/ Rotary Joint
  • Model No:
    RJ-90
  • Product Description:
    Coolant Rotating Joint:

    1.Coolant joint for high speed, high pressure and medium delivery.
    2.Usable for oil and water-soluble coolant.
    3.Seal bushing inside is made of cemented carbide and ceramics, which provide higher wear-resistance.
    4.The s...
Coolant Rotary Valve/ Rotary Joint
  • Model No:
    RJ-80
  • Product Description:
    Coolant Rotating Joint:

    1.Coolant joint for high speed, high pressure and medium delivery.
    2.Usable for oil and water-soluble coolant.
    3.Seal bushing inside is made of cemented carbide and ceramics, which provide higher wear-resistance.
    4.The j...