1.Adopts mechanic switch with forward/ reverse functions and longer service life with low damage.
2.The arm is made of high-class cast-iron. Arm slide is under strick heat-treatment and grinding.
3.2HP motor can provide diverse speed selection under heavy-duty cutting.
4.The main spindle is balanced by special spring. And is more durable than all traditional balance mechanism.
5.The over-load protective devices can secure the operator against injury.
6.Extra auxiliary dial for spindle feed depth indication. With this indicator, we can review the momental feed depth of spindle 1 through 210mm at any moment.
|Distance from column surface to spindle center , Max||750||D+C|
|Distance from column surface to spindle center , Min||220||C|
|Travel of spindle head||530||D|
|Distance from base surface to spindle end , Max||1060||E|
|Distance from base surface to spindle end , Min||260||F|
|Elevating height of Arm||580||E-F-I|
|Effective area of box table||600×445×380||L×K×H|
|Dimension of base||1260×640×160||R×S×Q|
|Taper hole spindle||MT#4|
|Stroke of spindle||220||I|
|R.P.M of spindle (rpm x steps)||88 , 154 , 282 , 455 , 796 , 1500×6 steps|
|Feed of spindle (rev. x steps)||0.05 , 0.09 , 0.15×3 steps|
|Main motor (HP)||2HP|
|Elevating motor (HP)||1HP|
|Coolant equipment (HP)||1/8 HP|
|Machine height from floor (Max.)||2170||M|
|Base + column height||1850||G|
|Net weight (approx)kgs||1120|
|Shipping weight (approx)kgs||1250|
|Shipping dimensions (LxWxH)||1680×826×2160|