1.Adopts mechanic switch with forward/ reverse functions and longer service life with low damage.
2.The arm is made of high-class cast-iron. Arm slide is under strick heat-treatment and grinding.
3.3HP motor can provide diverse speed selection under heavy-duty cutting.
4.The over-load protective devices can secure the operator against injury.
|Distance from column surface to spindle center , Max||1170||D+C|
|Distance from column surface to spindle center , Min||340||C|
|Travel of spindle head||890||D|
|Distance from base surface to spindle end , Max||1370||E|
|Distance from base surface to spindle end , Min||490||F|
|Elevating height of Arm||630||E-F-I|
|Effective area of box table||635×520×415||L×K×H|
|Dimension of base||1725×715×180||R×S×Q|
|Taper hole spindle||MT#4|
|Stroke of spindle||250||I|
|R.P.M of spindle (rpm x steps)||44-1500×12 steps|
|Feed of spindle (rev. x steps)||0.05 , 0.09 , 0.15×3 steps|
|Main motor (HP)||3HP|
|Elevating motor (HP)||1HP|
|Hydraulic clamping motor (HP)||1HP|
|Coolant equipment (HP)||1/8 HP|
|Machine height from floor (Max.)||2780||M|
|Base + column height||2060||G|
|Net weight (approx)kgs||2100|
|Shipping weight (approx)kgs||2300|
|Shipping dimensions (LxWxH)||2035×995×2240|